Saved By Love Creations

DIY Image Transfer Recycled Glass Bottles

[pinit]

[pinit]
Bring a touch of vintage chic into your décor with this chalk finish image transfer technique. This project works particularly well on bottles with texture, as you can sand after painting to remove the paint from raised areas for a chippy, old world feel. Head to The Graphics Fairy for thousands of free images to transfer to your bottles with this simple tissue paper transfer technique I am sharing today!

MATERIALS:

-Textured glass liquor bottles
-Chalk paint in several colors
-Printer (inkjet or laserjet is fine)
-White Tissue Paper
-Decopauge medium
-Medium Grit Sandpaper
-Flat paint brush
-Wax brush or lint free cloth
-Rubbing alcohol or glass cleaner and towel
-Clear wax or other sealer
-Images for transfer (I got all the images used in this post from www.graphicsfairy.com)
-masking tape
-cardstock or photo paper

DIRECTIONS:

1. Remove any labels from the bottles and clean the glass with hot soapy water or use Krylon Spray Adhesive Remover. This stuff works great!

2. Paint on chalk paint layer. This can be cross hatched and messy since we are going for a distressed look. Do several layers in different colors if you want different the sanding in a later step to reveal base colors. It is also fine to just do one layer.

3. Prepare image transfer by using masking tape to adhere tissue paper to a piece of cardstock or photo paper sized for your printer and image.

4. Print images, making sure you have sized them to fit your bottles.

5. Cut out image and apply a thin layer of decoupage medium to the back of it with your flat brush or sponge brush. Be careful not to rip the tissue. If the medium is too thick, you may need to thin it with a small amount of water.

6. Apply a thin layer of decoupage medium to the painted bottle and carefully place your image, ink side up. Smooth out any wrinkles with your fingers and apply a thin layer of the medium over the top of the image.

7. Once the decoupage medium is dry, lightly sand distress the texture areas of the bottle until you are happy with the degree of distressing.

8. Wipe away the sanding debris with a lint free cloth and seal entire bottle with clear wax using your wax brush. Another option is to seal the piece with the decoupage medium. I prefer clear wax with chalk paint. I love the unique shine it brings, and the fact that you can buff it to a shine when it dulls.

EXTRA TIPS

￮ Use antiquing wax after clear wax to create more of an aged look. This project would be great with photos of family made to look aged in photo editing software, like I showed you in the “Photo in a Bottle” project.

For more inspiration, visit our 50+ Wine Bottle Upcycle Projects and 50+ Image Transfer Techniques!

Aldi Ingredients Only Spicy Peanut Chicken Recipe

by Johnnie Collier

Today I am sharing a dish I whipped up for a recent asian themed potluck dinner. After all the american fare with the Fourth of July celebrations, our bible study went with oriental cuisine. I took it a step further and challenged myself to use all Aldi ingredients for a budget friendly, tasty and healthy Peanut Chicken Recipe. The only ingredient not from Aldi was the cucumber, which came from the garden, but you can get them there too! This dish was a big hit with my family and with the group. I am guessing it will be with yours too!

INGREDIENTS:

1/2 cup Crunchy Peanut Butter

1/4 cup Dry Roasted Peanuts

1 lime, juiced

3 cloves garlic, minced

1 tablespoon Hot sauce

3 tablespoons 2% Milk

1 tablespoon Honey

1 tablespoon soy sauce

1/4 teaspoon Ground Cinnamon

1/2 teaspoon Crushed Red Pepper

1/2 cup hot water

3 tablespoons Olive Oil

2 Chicken Breasts, sliced into strips

1 head broccoli, cut into small florets

1 large carrot, chopped

1 red pepper, cut into 1/4-inch strips

1 yellow pepper, cut into 1/4-inch strips

1 red onion, sliced

1/2 Cup Sweet Peas

1 cucumber, cut into 1/16-inch strips

Rice (optional)

DIRECTIONS:

PEANUT SAUCE:

In a small saucepan, whisk peanut butter, lime juice, 1 clove minced garlic, hot sauce, milk, honey, soy sauce, cinnamon and crushed red pepper. Cook over medium heat until it starts to boil.
Slowly add water until desired consistency. Set aside.

In a large skillet heat 2 tablespoons oil, add chicken and cook for 10 minutes or until lightly browned.
Add remaining oil, 2 cloves garlic, broccoli, carrot, peppers and onion and sauté for 3 minutes.
Add peas and cook for a couple of minutes more.
Add prepared peanut sauce to the skillet with chicken and vegetables.

Add cucumber, toss to coat.
Sprinkle with peanuts.

Serve over rice or noodles.

Spray Paint Mason Jar Chandelier Update

by Johnnie Collier

[pinit][pinit]

Do you have an outdated brass chandelier that makes you sad every time you look at it? I did. It was even worse hanging over that sweet DIY farmhouse table and benches I shared with you last week. Finding a replacement for that light has been a priority since moving here, and it has happened! Find out how I made this beautiful mason jar chandelier for $10!

SUPPLIES:

Chandelier

Cut mason jars (See How to Cut Mason Jars) with lids

Vintage Light Bulbs

Scissors for cutting metal (I use Tim Holtz Tonic)

Sharpie or other permanent marker

Krylon Dual Oil Rubbed Bronze

TUTORIAL:

Just to show you what we are replacing!

I found this guy for just $10!

I removed the lamp shades that came with it and unscrewed this white circular piece.

I used the white piece smaller side to trace for cutting a hole in the mason jar canning lid insert.

As you can see, this doesn’t have to be pretty. It will be covered. So long as it fits over the socket and the white piece will hold it in place.

Here you can see the outer ring of the canning lid, then the inner part with the hole we cut and slid over the socket, then the white ring screwed back into place to hold it all together.

I started to spray without attaching the jar lids, but then realized that was just silly. Attach everything except the jars and bulbs, then spray paint! If you can suspend the chandelier somehow, to get the underneath side good, that is best. We used a bungee cord and hung it in our garage (annoyed husband and suspended chandelier not pictured). Let this dry overnight.

Now we just screw the cut jar onto the lid and insert the light bulbs!

Soooo much better, don’t you think?

Reclaimed Wood Display Shelf For Upcycled Old Book Letters

by Johnnie Collier

[pinit][pinit]

I am obsessed with old books, well old things in general, but when I saw these words from old book letters I was sold! There is a cute store in Nashville called Island Cowgirl that we stumbled upon while looking for Archeology Antiques. The couple just opened the store 12 days before we wondered in, and they know how to do it! Such rusty, wonderful upcycled home decor and jewelry filled the industrial space. The prices were what got me. See, I don’t usually buy handmade things because of the whole “I can make that for like 1/100th of the price tag” thing that happens in my brain. Not so in this shop. I left with my arms full, contemplating where I would display my new found treasures when I got home.

Did you happen to see my recent DIY Kitchen Cabinet Upgrade with Crown Molding and Chalky Paint post? It was quite the transformation if I do say so myself. The kitchen is coming along great, but there was this sad space between the regal cabinets above the window. It has been begging me to decorate it. Enter words made up of letters cut from old books. Yes please! I bought “Faith”. Now, where would I put such a special accent? That is when I decided to attach a narrow display shelf to those cabinets to fill the desolate space above the windows.

First, I ripped the pallet wood to about 2.5 inches with the table saw. I used the miter saw to cut the wood to length for the space in between the cabinets. I used my Kreg Jig to drill a pocket hole on each end for attaching to the cabinets. If you haven’t used this tool, you are in for a treat. I use it in nearly every woodworking project for joining pieces together. The joins are super strong, and the jig takes out all of the guesswork. I showed you how to use a Kreg Jig in this Easy DIY Pallet Sign Tutorial. Next I painted it using two coats of Deco Art Chalky Finish Paint in “Everlasting”, the same color I used on the cabinets. A coat of wax sealed the deal, then I attached the shelf with 1.25 inch pocket hole screws.

Wanna have a little fun?

Guess how much I paid for “FAITH” from old books. Leave your anser in the comments. If you are right, I will send you an andvanced copy of my upcoming ebook, with 5 upcycled wine bottle home decor project tutorials you are going to love!

*By the way, if you want to make some yourself, check out this great tutorial from The Merry Thought; DIY Book Letters. Pretty easy to do with a printer and a scroll saw.

DIY Farmhouse Table and Bench Using Free Plans from Ana White

by Johnnie Collier

I have wanted to build a farmhouse table since I first started building a couple of years ago. Our new house I showed you in the recent Home Tour has just the spot for one, so we got busy woodworking and today I am sharing the fruit of our labor. Using free plans from Ana White, we built a lovely table and matching benches. I have seen similar sets going for around $1200. Ours cost under $200! Building saves so much money, and is super gratifying. If you are intimidated by power tools, I am here to tell you that you can overcome the fear, just like I did!

I built my table using Ana White’s free DIY Farmhouse Table Updated Pocket Hole Plan, and the benches using her Farmhouse Bench Plan. As always her plans are amazing, and free! This site is my go to for all things woodworking. It is where I went to begin this journey, and as you can see in my Woodworking Project Gallery, I have built several of her lovely pieces! Our house is becoming a hand-built home, one plan at a time.

We decided to stain the top and paint the base white. Finishing each before attaching them together made things easier. We did this for the benches too.

I used Minwax Pre Stain Wood Conditioner on the table tops before staining. This evens out the surface of the wood and makes the stain take more evenly. I kinda feel like a pro when I stain after conditioning! The conditioner is easy to apply and one can is enough for several projects. You just apply with a lint free cloth, let it soak in for about 5 minutes and wipe away any excess conditioner. After 30 minutes, apply stain.

I used Minwax Gel Stain in Aged Oak. This is my first time using it, and it is gorgeous!

This is my first time using the Gel Stain. I applied it with Minwax’s Staining Brush. It is definitely less drippy/runny than the regular stain, but not as mess free as the Wood Finishing Cloths. Those are still my favorite, and if I didn’t want to try the Aged Oak so badly, I would have used the cloths! I am hooked and you will be too. Find out why they are so magical here: DIY Reclaimed Wood Headboard.

After the stain dried overnight, it was time to seal. I used Minwax Polyurethane in Clear Satin. I applied two coats, drying 4 hours between and sanding with 220 grit paper between coats as well.

For the legs, I primed and painted with white glossy latex paint we had leftover from painting out trim. It took 2 coats.

I am completely in love with this set. It took a couple of weeks to build all three pieces and finish them, but I was busy with several other projects at the same time. If you were determined, you could do this in a weekend.

Have you braved power tools? If not, I hope you are a little closer to taking the leap now. It is so worth it!!

Upcycle Wine Bottles to Terrarium Wonderlands

by Johnnie Collier

Do you love eco-friendly crafts? How about succulent plants? Combine the two by creating your own whimsical land of tiny garden fairies, mushrooms, moss and more with this DIY terrarium wine bottle world. This project is simple is completed using artificial moss and succulents for those of us with less than a green thumb. What great gifts, home décor and centerpieces for your woodland themed birthday party these would make!

SUPPLIES:

-Cut wine bottles with varying heights (See How to Cut Wine Bottles)

-Artificial Moss

-Various artificial succulents

-Hot glue gun and sticks

-mini mushrooms, fairies and gnomes (found in most hobby stores for doll houses and miniature trains)

-Glass knobs or big glass prism or crystal beads

-E6000

-Latex or nylon gloves are optional

-Various round objects for the base of your wine bottle cloches; jar lids, candle lids, etc.

TUTORIAL:

Clean the surface of your cloche base and begin hot gluing your moss and filler.

Build with layers, adding miniatures and succulents.

When you are satisfied with your scene, place your cut wine bottle cloche top over the tiny world you created. You can glue this if you would like. I left mine removable so I could change things later.

To add a special touch, use E6000 to glue a knob or glass bead to the top.

EXTRA TIPS

￮ Cut the metal threading off of antique flea market drawer pull using bolt cutters, for a flat surface you can glue onto the top of your cloche.

If you like this post, you don’t want to miss:

50+ Wine Bottle Crafts to Make

50+DIY Terrarium Projects to Make

New Home Tour + Renovation Plans and Exciting News

by Johnnie Collier

We jumped into our new place with immediate renovations, no time wasted. It has been just about 2 months since we took possession and already, you have seen our DIY Countertop Makeover with Rustoleum’s Countertop Transformation Kit, as well as our DIY Kitchen Cabinet Upgrade. We wanted to take the time today to show you around the house before continuing with our updating plans. While house hunting, the biggest must haves on our list were land, wood shop space, studio space, and a couple of rooms for guests. It will be easy to see how we landed where we did, provided you bring with you a DIY remodel vision. Come with us as we go from a 1990’s country house to a vintage farmhouse style home, one budget minded project at a time!

Here is the aerial view. You can see the large front and back yard, pond, outbuilding (yay for workshop with 60 Amp service, and ample wood storage). There is even a running trail in the wooded area!

Here we are from the back of the house. That pond is delightful with a fountain feature and fully stocked. Not that I plan to fish, but several friends and family members are excited about that aspect. You wouldn’t believe the number of frogs hopping around there right now!

The tools are in the right half of the outbuilding, which has a concrete floor and windows in the back. The left hand side holds the tractor and all of the reclaimed wood I hoard!

Let’s go inside now…

Here we have the foyer. The first thing we did, even before the kitchen, was paint the walls and trim. Bye bye wood trim!! Some of you will want to vomit at the thought of that. I am a white trim girl, so white it is.

Here is the living room from the sliding doors that go out onto the back deck. The walls are no longer country blue. We went Moderate White by Sherwinn Williams.

I loved the wood ceiling and window trim in the living room, so it stayed as is. That light will be replaced with something less shiny brass and more awesome/vintage/farmhousey.

Here is the view of the double deck doors from the living room. I showed you a DIY Window Treatment for them no long ago. You can also see the new paint on the walls and trim:

Like I said, I left the wood on the big window above the double doors, and on the ceiling. No more deer head, if you were curious.

You have seen the kitchen in the DIY countertops and DIY kitchen Cabinet Upgrade posts.

It is now much brighter, fresher and along the lines of the farmhouse feel we want. Stay tuned tomorrow for the farmhouse table and bench we built!

Here is the master bedroom. Again, we have painted walls and trim, which you have yet to see!

Here is the master bathroom. If the picture extended right, you would see a shower, toilet and walk-in closet. It is a great space, but we have a lot of updating to do! I would like to rip out the vanity and drawers to it’s left and go with something junkier. Also, faux wood ceramic tiles are on my list! That mirror and those lights are never going to make the cut either.

Here you see the upper level from the living room. I love the open concept and cathedral ceilings. There are two mirror image bedroom dormers on either side of the upstairs, with a full bath in between them.

As you can imagine, we will be painting our style all over these canvases!

You may be wondering where I will have my art and craft supplies! This finished basement is huge! There are three rooms for storage, two of which are office like, or potential extra bedrooms. I have such big plans for this space. It is amazing, aside from the drop ceiling tiles. That is on the top of my list of “must go” features!

I am working on an exciting DIY custom built-in storage from bookshelves in this room. You will see more about that in August.

And now for more exciting news!!! You are going to get double the inspiration.

My very talented friend Karen, a.k.a The Graphics Fairy, has also recently purchased a new home! Follow the two of us as we share our DIY projects and home decor ideas in turning these houses into homes.

Tour Karen’s house in the suburbs HERE.

Karen and I are going to Haven Conference, and will be coming back to you next week with the latest in DIY products, projects and inspiration. I, for one, am super excited. Are you?!

DIY Kitchen Cabinet Upgrade With Paint and Crown Molding

by Johnnie Collier

[pinit][pinit]

I am thrilled to be sharing our kitchen cabinet upgrade with you today, mainly because that means it is finished! We moved into a house with, as you can see, outdated oak kitchen cabinets. Maybe you were here before and saw our DIY countertop transformation with Rustoleum. To continue the kitchen renovation, we took the cabinets up to the ceiling by boxing them in and adding crown molding to close the 12 inch gap between the ceiling and the tops of the cabinets. We tied together the new wood and cabinets by painting them with Chalky Finish Americana Decor Paint. It would have been fairly difficult to stain wood and crown moulding to match the current cabinets perfectly. This is a great way to add a high end look to your kitchen for cheap, especially if you are going to paint your cabinets anyway.

Here is what the cabinets looked like to start. This was after revamping the countertops to cover that country blue laminate.

To close the gap between the cabinet tops and the ceiling, we removed the trim on the cabinet tops with a pry bar. We measured the dimensions of the cabinet tops and built 3 sided boxes from 1×12 boards to fit. This was perfect for the 12 inch gap. It left about a half inch (since 1×12 lumber is actually 0.75×11.5 inches… I know). This was no problem since we knew we would be covering the gap with crown moulding later. We used construction adhesive to adhere the boxes to the top of the cabinets. We planned to nail trim to cover the seam where the cabinets met the box, which we would nail into both, adding extra security.

Here you see the trim (we used pine mullion) and the crown moulding. This was my first time cutting crown molding. Save yourself a ton of wasted materials and heartache by visiting Sawdust Girl’s How to Cut Crown Molding Tutorial. My little brain thought it would be as easy as cutting trim… ha! Not the case. Sandra didn’t touch on how to cut angles molding for angles that aren’t 90°…

We ran into that fun conundrum as you see in the above photo. There are charts on how to do this for every angle and every position on your saw. We finally ended up using this Bench Dog Polymer Crown-Cut Crown Molding Cutting Jig I picked up from Amazon. It was pretty helpful. We the 2 odd angles above the glass window containing cabinet were 135°, so we set up our molding on the saw exactly like it would siton the cabinet, which was only possible to maintain for cutting with the use of the jig. This is a process you are just going to have to go through in order to get to the good stuff! Sandra points out that she has to go back to her templates every time, even though she does this often. I found that to be the case everyday during this project!

Big thanks to DecoArt for providing the paint and wax for this project! We used Americana Decor Chalky Finish in “Everlasting” to paint everything from the bottom of the cabinets up to and including the crown molding. The best thing about using this paint was not having to sand or prime the cabinets!

We started by taping over the hinges with painter’s tape and painting the cabinets without removing the doors. This ended up in paint on the hardware anyway, so we decided to remove the doors for the rest of the cabinets.

All in all, we used 17 8 oz jars of the paint. If you are going to go this route, make sure you have plenty of paint for your project before you start. Waiting on more to come while you have no cabinet doors is less than fun. Ask me how I know.

Remember when I built the DIY Dog Feeding Station from Shipping Pallets? It fits under the window in our new house like a glove!

Painting the cabinets took 4 coats. We applied the clear wax and that was it. We were without cabinet doors for 2 weeks while we continued moving into the house and painting cabinets as time would allow.

What do you think? I love the high end look we achieved with little cost!

DIY Wine Bottle Craft Coat Rack

by Johnnie Collier

[pinit]

Scrap Wood Shelf With Wine Bottle Hooks

This project involves building a simple shelf from scrap wood and adding cut wine bottle tops to act as “hooks”. It is perfect for the entryway or mudroom, as the ultimate upcycle and conversation piece.

MATERIALS

– Scrap wood in lengths and widths you want for your shelf

-One of the following; Table Saw, chop saw, miter saw, circular saw

-Jig saw

-Hammer

-Pencil

-Tape Measurer

-Wood Glue

-1 ½ inch finishing nails

-Medium grit sandpaper

-Glass Cutting Supplies (see techniques page )

-Rubbing Alcohol

-Lint Free Cloth

-3 Wine Bottles

-E6000

-2 Sawtooth hangers

-Chalky finish paint or paint of your choice

-Sealant such as wax or polyurethane

DIRECTIONS

This was a project I made up as I went along, based on the scrap wood I had on hand. You can adjust the plan according to your materials. For most of the cuts I used a table mount chop saw but a handheld circular saw would be fine to.

The only cut that isn’t a straight cut is the one used to cut the shelf brackets. For this I used a scroll saw: I drew a shelf bracket shape sized to fit my shelf onto a piece of wood, cut out the bracket and traced it onto another piece of wood as a template for cutting out the second bracket. This is covered in step 2.

1. Cut board for shelf surface. For this I used an old piece of barn wood I had that measured 1 X 6.5 by 55 inches. I cut it to one 46 inch long piece and one 9 inch long piece. The 46 inch piece will be for the top and the 9 inch piece will later be used to cut the two shelf brackets.

2. Cut shelf rails. There are three of them (see pic). They are 1 x 3 inch boards cut to 40 inches in length.

3. Cut shelf brackets. Taking the 9 inch long piece of the old barn wood from above ( 1 X 6.5 X 9 inch ) I free handed a pattern onto the board that looked somewhat decorative but had fairly simple curves. I included the drawing I used as a template. Using the scroll saw I cut out the two identical shelf bracket pieces. Tracing one line for two pieces was easier than trying to make two identical individual pieces.

Sand all rough edges. Medium grit sanding by hand or with an orbital sander will do.

*Clamping the two shelf brackets together while sanding them ensures that they will remain identical to one another.

5. Using wood glue and 1 ½ inch finishing nails attach the shelf rails to the shelf bracket on the inside face (see pic). This made the over-all length of the shelf support unit 42 inches. (40 inch rails plus the thickness of the two 1 inch brackets).

6. Mount the shelf support unit on the 46 inch top board, centering it along the length dimension ( 4 inch overhang on each end) and flush at the back edge of the top board. Use 1.5 inch wood screws and wood glue to attach the top to the support rails. Make sure to square the support unit as best you can before you attach to the top( a quick check to make sure the long diagonal measurements are equal will tell you).

7. The last addition to the unit is for the back board. I used 1/8 inch hard board that has one side grooved. You can purchase a 4 x 4 ft piece that will be much easier to handle than a full 4 x 8. I laid the shelf unit onto the board and traced the outline. I positioned the unit on the board so that the grooves run vertically. Cut the back out using a jig saw, table saw or circular saw. The cut is hidden so just be sure to cut a little inside the line so that you don’t have any over-lap and you don’t see the back hanging over the edges. I attached using 1/2 brads and wood glue. Make another quick check of the diagonals to verify the square of the unit before you attach the back.

8. Allow the glue to set for 24 hours and then caulk all the seams using standard white caulk.

9. Sand any rough spots and paint. I went with chalk paint in antique white for the entire shelf except for the top surface board. I like the weathered wood with the chalk finish.

10. Seal with Wax or desired sealant. I applied clear wax with a lint free cloth. Let cure per instructions before handling.

11. Measure your shelf and mark with a pencil where your bottles will go so that they are evenly spaced.

12. Attach cut wine bottles tops (see How to Cut Wine Bottles) by placing a generous amount of industrial strength glue such as E6000 around the cut rim where it will contact the shelf

13. Attach a sawtooth hanger on the back with hammer, a couple of inches in from the edge of the shelf top.

EXTRA TIPS

￮ Power tools can be intimidating. They don’t need to be though! I started at ana-white.com and found everything I needed to know to be successful and safe. You can too!

Check out craigslist for used tools, or see if your town has a makerspace where you can pay a small membership fee and have access to the tools you want to try.

Vote for SBLC – Bob Vila Thumbs Up Blogger Contest

by Johnnie Collier

[pinit][pinit]

Remember that one time, when Bob Vila gave me a thumbs up? Ok, well, my mason jar chimes are in the running with 5 amazing DIY mason jar projects for the grand prize in the Bob Vila Thums Up DIY Competition.

You have to know that I use to religiously wake up at 6 a.m. every Saturday to watch this guy on This Old House. Love the man, so just being noticed by him is winning, but I still wanna win… you know, for real win. You can help by clicking the link and voting for me. Everyday. Between now and July 31st. Please? Thanks!

Saved By Love Creations

DIY Image Transfer Recycled Glass Bottles

MATERIALS:

DIRECTIONS:

For more inspiration, visit our 50+ Wine Bottle Upcycle Projects and 50+ Image Transfer Techniques!

Aldi Ingredients Only Spicy Peanut Chicken Recipe

INGREDIENTS:

DIRECTIONS:

PEANUT SAUCE:

Spray Paint Mason Jar Chandelier Update

SUPPLIES:

TUTORIAL:

Reclaimed Wood Display Shelf For Upcycled Old Book Letters

Wanna have a little fun?

Guess how much I paid for “FAITH” from old books. Leave your anser in the comments. If you are right, I will send you an andvanced copy of my upcoming ebook, with 5 upcycled wine bottle home decor project tutorials you are going to love!

DIY Farmhouse Table and Bench Using Free Plans from Ana White

Upcycle Wine Bottles to Terrarium Wonderlands

SUPPLIES:

TUTORIAL:

New Home Tour + Renovation Plans and Exciting News

And now for more exciting news!!! You are going to get double the inspiration.

Tour Karen’s house in the suburbs HERE.

DIY Kitchen Cabinet Upgrade With Paint and Crown Molding

DIY Wine Bottle Craft Coat Rack

Vote for SBLC – Bob Vila Thumbs Up Blogger Contest

Meet Johnnie

Categories

Recent Printables

50+ Roundups

MATERIALS:

DIRECTIONS:

For more inspiration, visit our 50+ Wine Bottle Upcycle Projects and 50+ Image Transfer Techniques!

INGREDIENTS:

DIRECTIONS:

PEANUT SAUCE:

SUPPLIES:

TUTORIAL:

Wanna have a little fun?

Guess how much I paid for “FAITH” from old books. Leave your anser in the comments. If you are right, I will send you an andvanced copy of my upcoming ebook, with 5 upcycled wine bottle home decor project tutorials you are going to love!

SUPPLIES:

TUTORIAL:

And now for more exciting news!!! You are going to get double the inspiration.

Tour Karen’s house in the suburbs HERE.

Meet Johnnie

Categories

SBLC Topics