home decor projects

DIY Distressed Starburst Mirror for $5

[pinit]
[pinit]

This project has been on my to do list for months and months. I finally got around to making a distressed, chippy starburst mirror from recycled paint stirrers and other reclaimed wood I have collected from various discard piles. The hold up was finding a circle mirror, which I ended up finding at Joann Fabrics for just a few dollars. This piece took about an hour to make start to finish and cost under $5!

Pretty amazing when you consider this similar mirror at Iron Accents is $410! If you are considering paying that price for something like this… don’t! Make your own version for way cheaper, and feel awesome about it.

SUPPLIES:

*** NOTE: I used a cordless Ryobi AirStrike Nailer which is not a must have, but makes this project (and most of my woodworking projects) go smoothly and quickly. Work smarter, not harder!

***Oh yeah, and also: The wreath form on top of the mirror is optional. I preferred the project with it, but it looks cool without as well.

10 inch diameter round mirror

E6000

Scrap wood about 12×12 inches

Ryobi Airstrike nailer

Wood Glue

Paint stirrers or other wood scraps painted with your favorite colors (I used Chalky finish paint from Americana) – I cut mine to about the same length with my chop saw. You can have them random lengths or create your own pattern of rays. Lay out your pieces and play with the design until you love it.

10 inch chipboard wreath form or other circle to place over mirror for a more finished look

Wire or other picture hanger hardware

TUTORIAL:

Use E6000 on the back of the mirror to attach it to the 12×12 inch wood scrap. It doesn’t have to be exactly 12×12, but there needs to be enough wood all the way around the circle mirror for nailing paint stirrers to.

Lay out “rays” to determine placement. I did two layers. I applied wood glue and nailed the bottom rays into the 12×12 inch wood with 18 gauge 1/2 inch brad nails in my nailer.

I placed the second layer or rays using the nailer, no glue. I painted the wreath form with “lace” Chalky Finish Americana paint and nailed it to the underlying rays to frame the mirror.

Staple craft wire to the back for hanging and enjoy!

Want more? Visit our 50+ Paint Stick Projects:

DIY Vintage Holiday Centerpiece With @Floracraft Foam Trees

by Johnnie Collier

[pinit][pinit]

The holidays are here, and many of you are busy planning decorations and meals. Today I am sharing with you an easy DIY holiday centerpiece using vintage buttons, found objects and Styrofoam™ cones. This is the perfect project for using up those antique embellishments I can’t resist buying every chance I get!

This post is sponsored by Make it Fun: Crafts and Crafts ‘n Coffee! All opinions are mine.

SUPPLIES:

Styrofoam™ cones in 3 sizes

Hot glue gun

Vintage buttons, twine, lace, ribbon, doilies, hardware

Decorative eyelets, pearl and jewel stickers in creams, whites, golds and reds

Gold and white tissue paper

Mod Podge

TUTORIAL:

For the white button tree, I randomly hot glued buttons from the bottom to the top. I made a paper foil star with my Tim Holtz 3D star die and attached it to the top of the tree with a bamboo skewer. The end.

For the red tree, I did the same thing, but wrapped the tree in red organza before attaching the buttons and hardware. This was to prevent the white foam from showing.

I placed it on a candle holder as the stand. Using a gold sparkly mini clothespin, I attached a Christmas tag to the top and tied a bow around that with twine.

For the white and gold tree, I decoupaged gold and white tissue paper onto the cone using Mod Podge. I added a random piece of hardware with a vintage clothespin, and wrapped that with gold organza and black twine. It sits on an old jar lid (same jar that use to hold all those vintage buttons)!

Those pretty, warm lights you see in the background are Design it:® LED Light Strands, which I love because they are light weight and ready to go out of the package. No outlet needed or batteries to buy is always a plus in my book!

I hope you enjoyed this project as much as I did, and are inspired to make the old new again!

50+ Repurposed Yardstick Crafts and Projects

by Johnnie Collier

[pinit]

Yardsticks aren’t just for measuring anymore. You can repurpose cool vintage yardsticks into some unique upcycled decor, jewelry and accessories. Here are 50 of our favorite repurposed yardstick projects from around the web. If we missed yours, send us a link so you can be included!

Vintage Yardsticks, Vintage Bottles and Playing With Wire	Old yardsticks and rusty hooks	Make Your Own “Iron” Throne
Fall Centerpiece…yardsticks, gourds and a touch of aqua.	The Wall Ruler	Board & Batten: Made from Yardsticks
Re-Purposed Yardstick Christmas Tree	DIY ART -YARDSTICK DEER SILHOUETTE	Rustic tote
Yardstick ornament	GARDENING FOR KIDS {KENZIE%u2019S GARDEN}	Yardstick Table
Rulers and Yardsticks aren’t just for measuring anymore	DIY Vintage Ruler Coat Rack	Vintage yardstick Desk
Make an Upcycled Ruler Frame	orating / Do-It-Yourself Decorating / DIY Home Accents / Crafty Chic Knobslog injoin now	Drawer Organizer DIY
Vintage Yardstick Star	Yard stick basket	Yardstick Christmas tree
This Basket Rules! Yard Stick Basket	Repurposed Tennis Racket with Yardstick wall organizer	Wooden stick jewelry
thrift store value meal	Fathers Day Gift	How To Make A Vintage Inspired Chalkboard
Repurposed Ruler Starburst Mirror	Yardstick stars	Ruler Lamp
Chalk Paint and Yard Stick Serving Tray Makeover	Yardstick Buffet Tutorial	MEASURING UP: YARDSTICKS
yardstick tray	DIY TUTORIAL: VINTAGE YARDSTICK ARROW	Business Cards Holder
common yardstick as picture ledges	Yardstick Wall Art	Yardstick Ornaments
a crate made out of yardsticks…	Ruler Wall Mirror	Stair risers
diy {yardstick backsplash}	Yardstick Tray	You Made That from What?
How-to: Ruler Clutch Purse	Yardstick Stool Project	Vintage Yardstick Tray
Upcycled Yardstick	Clock	Yardstick table

InLinkz.com

DIY Reclaimed Wood Christmas Tree and Advent Artist Blocks

by Johnnie Collier

[pinit][pinit]

Today’s project is a rustic, reclaimed wood Christmas tree advent calendar that you can make for little to no cost! Building from salvaged wood and paper crafting all in one project! I created the blocks using Eileen Hull’s (soon to be released) Scoreboards Block dies. The die makes blocks in three sizes, for tons of creative potential. Think about artist trading cards, but 3-D! Last Christmas I showed you how to make an advent calendar from wooden blocks, and that is the first thing I thought of when I saw this die. Read on to see how I used stencils from Stencil Girl, spray ink, number stickers and washi tape to decorate my mat board cubes. Watch the video to make your own tree, or display your blocks freestanding. These would make great Christmas gifts and decor for your holiday get togethers.

SUPPLIES:

For the Blocks

Mat Board

Heidi Swapp Spray ink Gold, Green, Red

Stickles in red, green, gold

Washi Tape in Christmas Patterns

Stencils (I used Stencil Girl)

Mod Podge Antique

For the Tree

Scrap wood

Mitre Saw

Nailer or hammer and nails

Wood Glue

E6000

5 gallon paint stirrers

TUTORIAL:

ADVENT BLOCKS

You may want to decorate your cubes before assembling them into the 3D shape. First I will show you assembly, then how I decorated my cubes.

I chose the smallest of the three cubes for my calendar. This is what the mat board looks like after it is cut with Eileen’s awesome new die!

Fold cubes along score lines. Two of the scored rectangles are needed for each cube. Place them together to form the cube. You can glue the tabs in place if you would like, but I didn’t find it necessary with the mat board. I haven’t tried other paper.

Place stencils over blocks and spray.

Clean up excess ink that’s on the stencils for a reverse image on the blocks, and you waste less ink!

I used red, gold and green sprays, allowing about 10 minutes dry time between each color.

Once that dried, I adhered washi tape to some blocks, the black sticker numbers and coated with the front surface with Mod Podge Antique for an aged look. I thought it needed some sparkle, so I added stickles in red, green and gold.

RECLAIMED WOOD CHRISTMAS TREE

I made the tree like I showed you in this DIY wood pallet Christmas Tree post, and in the video at the end of this post. The only difference is I used chippy, weathered 2×4 scrap wood I found at a demolition site. I determined the dimensions of my tree based on the 1.5 inch advent cubes. The base is 19 inches, and the height is 20 inches without the frame.

I made the five shelves from paint stirrers, cutting them with the mitre saw to lengths that allowed 2 inches for each block. So the first one is 2 inches, then 6 inches and so on, 10 inches, 14 inches and finally 18 inches for the bottom shelf. I laid the tree flat and added a thin line of E6000 to the back of the paint stirrer and placed them on the tree where I wanted the shelves.

I decided to use scrap wood strips to frame the tree, just cutting to length with my mitre saw and using my Ryobi nailer to attach.

I hope you enjoyed the project and the blocks as much as I did! Visit Artists on the Block for more news, updates and projects as artist trading blocks take over the mixed media community!

Be sure and visit other projects using the blocks in the Stencil Girl and Sizzix Artist Trading Blocks Hop

Blog Hop Order

Leslie Tucker Jenison

Dollar Store Framed Reindeer Silhouettes

by Johnnie Collier

[pinit]

This Dollar Store Christmas Decor DIY is super fast, cheap and pretty awesome looking. If you are looking for a quick way to create a festive Christmas feel for your holiday get together, this is your project!

All you need:

The sparkly, glittery reindeer come in 2 a pack for $1

Grab as many 5×7 frames as you will need

Foam Mount Stickers

Scissors

Christmas Patterned Paper

Instructions:

Cut out the paper to fit the frames and stick inside just like you would a photo.

Tape the reindeer to the outside of the glass with foam mount stickers, which you can get at any craft store and most department stores. You are ready to display! See, I told you it was fast and easy.

DIY Starburst Dollar Store Pencil Wreath With @Floracraft

by Johnnie Collier

[pinit][pinit]

I am a member of the Make It: Fun® Team. This DIY Starburst Christmas Wreath is sponsored FloraCraft® Make It: Fun® Foam. All opinions are honest and mine, like always.

Incorporate the chalkboard craze into a fun starburst Christmas wreath made with dollar store Christmas patterned pencils and a FloraCraft® Make It: Fun® Foam wreath form! This project is easy, quick and cheap. Use it for gift lists, holiday greetings or a letter for santa!

SUPPLIES:

FloraCraft® Make It: Fun® Foam wreath form

Dollar Tree Christmas Pencils

Hot Glue Gun and Sticks

Cardboard cut in a circle the size you want your chalkboard

Burlap Wire Ribbon

Black chalkboard paint

one inch foam or paint brush

TUTORIAL:

Put a dab of hot glue on the end of the pencils and shove them into wreath at varying depths. It doesn’t matter if the eraser comes through to the center of the wreath because you are covering the hole with your chalkboard later.

Continue all the way around the wreath.

Paint your cardboard with chalkboard paint and let dry. I did 2 coats, sanding lightly between.

Tie your burlap ribbon in place, then hot glue your chalkboard circle. Hang and enjoy!

For more inspiration on creating with FloraCraft® Make It: Fun® Foam, please also check out Crafts n’ Coffee or follow the hashtag #MakeitFunCrafts.

DIY Hand Painted Christmas Sign with Printable

by Johnnie Collier

[pinit]
[pinit]

These hand painted rustic signs are a little addictive, and pretty easy to make. Pam from Little Red Porch came over and showed us her technique in this DIY Rustic Wood Sign . I made a video showing you how to use Photoshop to print your text in sections so you can tape them together for transferring large art to wood in this Americana Chalky Finish Paint Sign Tutorial. Today I am sharing this Merry and Bright sign, as well as the text file for you to print off to create your own like I showed you in the links above mentioned.

To download the printable, right click the thumbnail and the full resolution file will pop up for you to print.

Make Wood Pallet Christmas Trees

by Johnnie Collier

[pinit][pinit]

Today I have another scrap wood/ pallet wood project to help you get in the Christmas spirit. There is a video showing how to create adorable trees from your scrap pile that you can use as decor, card holders, advent calendars, outdoor decor, gifts and more. The larger one I am using as a card display. Super cute, quick and easy to make, these primitive trees are the way to go.

SUPPLIES:

Scrap wood

Wood glue

Mitre saw

Brad Nailer

Wire and hooks for Christmas card holder

Paint if you want to paint your trees

TUTORIAL:

DIY Handpainted Signs With New Americana Decor Chalky Finish Paint

by Johnnie Collier

[pinit][pinit]

I had the wonderful opportunity to try out the new Americana Decor Chalky Finish paint, available online at Home Depot. You can have it shipped to your home, or to your local Home Depot for free pick-up! This product is perfect for creating distressed signs, which is what I am sharing with you today. I am most impressed by the huge color palette, the high quality of the paint, the ease of distressing and the variety of mediums and finishing options. There are so many things I plan to do with this stuff, but for now…

The technique is the same as this rustic sign DIY from guest artist Pam of The Little Red Porch, using the chalky finish paint. I also added a video illustrating how to use Photoshop to print sections of your sign for taping together and transferring onto the wood. We had several questions on that part in the first post, so hopefully things will be clearer, at least for those of you who use Photoshop.

Begin with a piece of scrap wood in the size you want your sign. I have tons of the stuff lying around here. The 2 signs I am using for this tutorial are on very different wood. The Proverbs verse is on rough MDF, and the other is on smooth ply wood. Both have their place, depending on the look you are trying to achieve. I prefer the smoother, I discovered.

My cheap foam brush worked great for the background. I used the chalky finish paint in “Primitive” for my background. Great coverage, especially on this chippy, rough surface! While that is drying…

Create your text using your favorite software. Print your artwork in sections if your sign is larger than your printer will print. Here is how to do that with Photoshop:

Tape image sections together. You may need to cut off any border your printer added where the sections meet.

Place transfer paper between text and wood and trace letters with stylus or pen.

Once your text is transferred, fill it in with your color of choice. I used Carbon for the black, Everlasting for the white, and a mixture of Romance and Innocence for the pink color.

Just use a small round paintbrush. I like to use watercolor brushes for hand lettering with paint. I wet them first and it seems to help the flow. Play around until you figure out what works best for you.

Once you are happy with your lettering, you may want to sand distress the piece, and frame your sign like we showed you in Pam’s DIY sign tutorial previously.

I applied clear wax and let that dry for about one hour.

I applied the dark brown creme wax over the top of the clear creme wax, with a lint free cloth. Wipe back to remove excess, working in a few inch sections at a time. If you find you have overdone it with the dark and can’t wipe away enough, you can use the clear wax to pull it up. Just dip a clean cloth in the clear and wipe the area that is too dark.

For the “Awesome” sign, I cut the text out and made a stencil with my Cricut. Also, I painted it on smooth ply sheets. I used the soft varnish finish instead of wax, and it is velvety fabulousness.

I heart it so much I want to make a thousand more.

Visit DecoArt for more chalky finish project ideas.

Stay tuned as I am planning projects using the Americana Chalky finish image transfer and crackle mediums.

Easy DIY Number Vintage Plate Wall

by Johnnie Collier

[pinit][pinit]

I saw this idea in Flea Market Magazine and had to give it a go. It is super fast and easy, and costs not much. You don’t even need to buy plate wall hangers. I will be showing you a cheap way to display your plates on the wall using safety pins!

Supplies:

Collect old plates from flea markets, thrift stores, garage sales

E6000 Industrial Glue

Safety Pins

Numbers cut from Scrap paper

Glossy Accents or other craft glue

TUTORIAL:

Glue your numbers onto the plates. I cut mine from scrapbook paper using my cricut. I measured each plate diameter to determine what sizes to make the numbers.

Using E6000, glue safety pin onto back of plate, making sure it is centered so your number hangs upright. Let dry overnight.

Hang on wall in desired design. That is it!

DIY Distressed Starburst Mirror for $5

SUPPLIES:

TUTORIAL:

Want more? Visit our 50+ Paint Stick Projects:

DIY Vintage Holiday Centerpiece With @Floracraft Foam Trees

SUPPLIES:

TUTORIAL:

50+ Repurposed Yardstick Crafts and Projects

DIY Reclaimed Wood Christmas Tree and Advent Artist Blocks

SUPPLIES:

TUTORIAL:

Blog Hop Order

Dollar Store Framed Reindeer Silhouettes

All you need:

Instructions:

DIY Starburst Dollar Store Pencil Wreath With @Floracraft

SUPPLIES:

TUTORIAL:

DIY Hand Painted Christmas Sign with Printable

Make Wood Pallet Christmas Trees

SUPPLIES:

TUTORIAL:

DIY Handpainted Signs With New Americana Decor Chalky Finish Paint

Visit DecoArt for more chalky finish project ideas.

Easy DIY Number Vintage Plate Wall

Supplies:

TUTORIAL:

Meet Johnnie

Categories

Recent Printables

50+ Roundups

SUPPLIES:

TUTORIAL:

Want more? Visit our 50+ Paint Stick Projects:

SUPPLIES:

TUTORIAL:

SUPPLIES:

TUTORIAL:

Blog Hop Order

All you need:

Instructions:

SUPPLIES:

TUTORIAL:

SUPPLIES:

TUTORIAL:

Visit DecoArt for more chalky finish project ideas.

Supplies:

TUTORIAL:

Meet Johnnie

Categories

SBLC Topics