Make Washi Tape Jewelry and Charms

by

[pinit]
Easy Washi Tape Earrings

Today’s project is a fun, inexpensive earring tutorial using washi tape, wire and Dimensional Magic by Mod Podge.  I am in love with these.  I wore them on a recent getaway and got so many compliments.  A random lady in a boutique ordered a pair when I told her I made them!  Think about all the washi tape prints and colors.  You could make a pair for every outfit or occasion.  You can use them as charms for embellishing paper crafts, cards, and jewelry projects of all kinds.

Let’s get started!

SUPPLIES:

WashiTapeEarrings5

Mod Podge Dimensional Magic

Circle punch or other shape you want for your charms (you could also cut by hand)

Washi Tape

White Card Stock

Dremel for creating hole or glue on bail (hanging mechanism)

Jewelry Wire – I used 20 gauge copper artistic wire and 20 gauge artistic wire silver coated

Wire cutter

Round nose and flat nose pliers

Make easy Washi Tape Earrings with Mod Podge and a circle punch! @savedbyloves

TUTORIAL:

Make easy Washi Tape Crafts Earrings with Mod Podge and a circle punch! @savedbyloves

Apply tape to front and back or card stock.  Line strips of tape up so that there is no space between them.  Line up patterns for seamless look if your hole punch is bigger than the width of the tape.  Punch out shapes.

Make easy Washi Tape Earrings with Mod Podge and a circle punch! @savedbyloves4

Lay shapes on flat, protect surface.  I like to use this spikey tray I got at Michaels (pretty sure it is Martha Stewart).  That way if I put too much Dimensional Magic on, it will runs off the side and collect in the bottom of the tray, sparing my piece from becoming a big blob.  Apply Dimensional Magic starting in the center, then pulling out to the edge of the shape with the tip of the bottle.  Let sit for about 20 minutes, then come back and remove any air bubbles with a toothpick or with your fingernail.  Then let dry overnight, flip them over and do the other side.  If you want a flat side, you can just brush on Mod Podge with a brush to seal instead of doming both sides.

Make easy Washi Tape Earrings with Mod Podge and a circle punch! @savedbyloves

Use as charms, make earrings, magnets, embellish your paper crafts and more.

I played with wire using a jig from Bead Landing.  I plan on sharing a tutorial on making your own earring findings like I did for these.

Check out some more things to make with washi tape by clicking the thumbnails below:

Washi Tape Rosette  Earring Tutorial

50+ Washi Tape Projects to Make

Tips to Fast, Mess Free, DIY Glass Tile Pendants

by

[pinit]
Xyron Create a Sticker for Easy, mess free Glass Tile Pendant @savedbyloves

 [pinit]

If you have ever made glass or acrylic tile pendants, you probably know that it is more involved than it looks.  About 2 years ago, I need to make a slew of these, and decided to run my images that I wanted to adhere to the pendant through Xyron’s Create-a-Sticker Machine.  I ran them through oriented so that the image side would be the sticky side, and stuck the tile right on the sticky, as you will see pictured in this tutorial.  This eliminates having to glue the images onto the tiles, which is, at least for me, a messy hassle!  I wanted to scream this technique from the rooftops when I thought of it, but I decided to wait and see how the pendants held up long term.  At last I am here to report that after 2 years, the tiles I made this way look gorgeous.  The image has not peeled away from the glass or discolored even slightly.  You still have to seal the backs so that the pendants are waterproof, but I have a great tip for that step as well.  Read on and you will be busting out gorgeous, durable graphic pendants crazy fast.

 Xyron Create a Sticker for Easy, mess free Glass Tile Pendant @savedbyloves

 SUPPLIES:

XyronGlassTilePendant2

Xyron 1.5 inch Create-a-Sticker  with Permanent adhesive cartridge

Printed images for your tiles, or decorative scrapbook paper/artwork – I create collage sheets in Photoshop with images made to fit whatever tiles I am using (round, square, rectangle in various sizes) and print it, or I create backgrounds with spray ink, ink pads, markers, stamps, rub-ons, doodles to use on my tiles.

Detail scissors

Mod Podge (I prefer satin finish to seal my glass tiles)

Small flat paintbrush

Masking tape or contact paper (super cheap at dollar store and works great for the sealing trick you will see later)

Ceramic tile or other flat surface

Sandpaper 150-200 grit (I use Tim Holtz

Glass tiles or Acrylic Tiles (I use Mod Podge Podgeable Shapes and glass tiles)

Glue on bails (my very favorite are aanraku small bails.  They are beautiful, the perfect size for 1-2 inch round, square or rectangle tiles and are well worth the cost (about $0.40 each)

E6000 glue for the bails (this stuff would glue a person to the ceiling and hold)

-OR-

Jewelry wire to wrap pendants in a glue free way like I showed you previously:

Glue Free, Drill Free Way to Attach Pendants

I love this method for the fancier look compared to the glue on bail.  Sometimes people want simple, other times wire is just the special touch that makes them fall in love with a piece.

TUTORIAL:

XyronGlassTilePendant4

Take the image and cut into a strip that will fit in the Xyron sticker machine.  If you have a larger machine, you can run larger sheets through it to create stickers for several tiles at once.  Here I am using the 1.5 inch on cardstock covered on both sides with lovely washi tape.  Scrapbook paper, photos or whatever you want as your pendant image can be used.  Place the image side face down in the machine (this is the opposite of how you make most stickers since you are going to adhere the glass to the sticky image you want to show).  It is not really important for this example since my washi covered paper is the same on both sides.

XyronGlassTilePendant5

Burnish the image onto the adhesive with a bone folder, credit card or ink pen (yep, I improvised).  This assures the maximal adhesive transfers to the paper image.

XyronGlassTilePendant6

XyronGlassTilePendant7

XyronGlassTilePendant8
Sand any uneven edges left after cutting to tidy up your piece.
XyronGlassTilePendant9

TIP:  Lay contact paper with sticky side up, or masking tape sticky side up on a tile or other flat surface. Place your pendants paper side up, glass side down on the tape or contact paper.  This keeps the pieces from moving around when you seal the back.  I lost hours of my life with sliding pendants that I moved back into place with my fingers, getting glue all over me and fingerprints all over my tiles.  No fun.  This is the best solution ever.

Apply 3 layers of Mod Podge, drying at least 30 minutes between each.  I like to let cure 1 week before sending the pendant off to it’s new home.  After 24 hours, I glue on the pendant bail or make a wire wrap bail like I discussed earlier (see above link).

XyronGlassTilePendants10

Speaking of Xyron, Feature Product Friday is happening, and the start of the show is Xyron.

What is Feature Product Friday, you ask?  It is the brainchild of my friend Amy of Plucking Daisies.  If you’ve been here awhile, you have probably seen her rockin contributions to SBLC.  I love talking about products with Amy.  We are equally obsessed with the next new creative spray ink, paper, design line, gadget and trinket that will help us create what we love and take our imaginations to new places.  We want to share our go to products with you, and see what you have come up with using them.   Each Friday will be a new product featured.  We will show you our projects, as well as a roundup of your best projects using the featured product (see the list below).

Even more good news… Amy is giving away a stash of Xyron supplies, so head over and enter the Xyron Giveaway at Plucking Daisies.

TOP PROJECTS USING XYRON

 

Make Paper Feather Earrings

by

[pinit]
How to Make Paper Feather Earrings @savedbyloves

[pinit]

I heart paper and I heart feather earrings.  It was only a matter of time before the inspiration to make paper feather earrings hit.  That time is now.  You can make your very own with just a few supplies…

How to Make Paper Feather Earrings @savedbyloves

So you may have heard me and my creative bloggy friends mention SNAP!, a conference that took place last month in Utah.  It was amazing to meet these ladies face to face, and share ideas, laughs, even some dance floor moves.  We get into the details, us creatives.  You should have seen the business cards all dressed up with washi tape, glitter, clips, candies and on and on…  Rebecca at the Crafted Sparrow embellished hers with little aqua paper feathers to hers.

Die Cut Paper Feathers

In all the room chaos, I must have ended up with my roommate’s Crafted Sparrow business card, but no fear.  I put it to good use.  When I got home and started sorting through my stash, I saw the 2 paper feathers and knew earrings were necessary.  You can make them too, no problem.  If you didn’t happen to get 2 of Rebecca’s cards with feathers, you can die cut your own, or just download this free feather template and use it to hand cut your feathers from pretty paper!

SUPPLIES:

2 Paper Feathers

20 gauge jewelry wire

Ear wires

Beads or crystals of your choice for feather stem

Tiny eyelet and setter

Flat nose and round nose pliers

Magic Glos Resin or Mod Podge Dimensional Magic

Awl

Wire cutter

TUTORIAL:

PaperFeatherEarrings3

Apply resin to paper feathers.  I did both sides (when one side dries, flip it over and do the other).  For my thoughts on Magic Glos resin, check out my patriotic sprinkle earrings tutorial.  You can also use Mod Podge Dimensional Magic or 2 part resin, but you will have to wait overnight for these to dry before moving on to the next step.  With Magic Glos the wait is 20 minutes in sunlight or under a UV lamp.

PaperFeatherEarrings5

Poke a hole in the tip of your feather where the stem starts, and set your eyelet.  For the best explanation of how to do this with tiny eyelets, go to Retro Cafe Art Gallery’s post on DIY acrylic tags.  That is how I did it, but I used a the pointy end of an aluminum crochet hook because I didn’t have an eyelet setter tool.

PaperFeatherEarrings6

Cut about 5 inches of wire and insert into eyelet from front to back of feather.

PaperFeatherEarrings7

Bend wire up with a one inch tail as in photo.

PaperFeatherEarrings8

Loop tail around to form coil as shown.  I wrapped four times.  Cut off excess wire from tail if necessary.

PaperFeatherEarrings9

String beads onto wire on top of coil.  I used 2 small faceted beads on either side of a larger crystal.  Bend wire at 90° as shown.  Leave a space between the bend and the top bead for coiling the wire (see below).

PaperFeatherEarrings10

Loop wire around round nose pliers as shown.

TIP: When making earrings, I like to mark with a sharpie where on the pliers I wrap the wire so that I can make the loop on the next earring the same size.

PaperFeatherEarrings12

Slide ear wire finding onto loop, making sure you have it oriented so that when you put it in your ear, the side of the feather that you want to be the front is facing towards the front.

PaperFeatherEarrings13

Wrap the wire to the top of the bead, forming a coil as shown.  Clip the excess wire off with the wire cutter.

 

 

 

 

 

Martha Stewart Mother’s Day Etched Glass Pendants

by

[pinit]
@savedbyloves DIY Etched Glass Tile Pendant #MarthaStewartCrafts #mothersday
[pinit]

 

Today brings a fun, simple Mother’s Day gift DIY using Martha Stewart Crafts glass etching cream to create customized glass tile pendants!  As I mentioned Monday when I showed you my doily etched wine bottles, this etching cream is simply amazing.  No glass is safe around me now!  Read on to see how to make these lovely pendants in no time!

#marthastewartcrafts #mothersday

SUPPLIES:

#MarthaStewartCrafts

Glass tiles (I ordered mine on Etsy – size 1 7/8 x 7/8 inch

Martha Stewart Etching  Cream and included brush

Martha Stewart Adhesive Stencils

Rubbing alcohol

Pendant Bail (I use aanraku small silver bails from Etsy or Ebay)

Pretty Patterned Paper

Mod Podge Dimensional Magic and Antique (optional)

Sandpaper (150 grit)

E6000

Chain or cord of choice

Masking Tape

Protective gloves

TUTORIAL:

EtchGlassPendants7

Clean glass tiles with rubbing alcohol.

#MarthaStewarCrafts #Mothersday

Place adhesive stencil.

#MarthaStewarCrafts #Mothersday

Tape off area you don’t want etched and apply thick layer of etching cream.

#MarthaStewarCrafts #Mothersday2

Wait 15 minutes and then rinse cream away under faucet.  Make sure to clean stencils well.

#MarthaStewarCrafts #Mothersday3

Find area of paper you want as background.  Trace pendant and cut out paper for backing.  Using double sided paper gives the back of your pendant a pretty, finished look.

#MarthaStewarCrafts #Mothersday4

Use your favorite decoupage medium to adhere backing to tile.

#MarthaStewarCrafts #Mothersday5

When that is dry, sand edges to even things up a bit.

#MarthaStewarCrafts #Mothersday7

Seal paper backing with your favorite medium.  I love the antique Mod Podge.  Apply 2-3 coats, allowing 30 minutes dry time between each.

#MarthaStewarCrafts #Mothersday8

Adhere pendant bail using E6000 or other industrial strength adhesive.

@savedbyloves DIY Etched Glass Tile Pendant #MarthaStewartCrafts #mothersday

Let your bail set overnight and add your chain to finish!

EtchedGlassTilePendant4

I love them!  I made one for my grandma, mom and sister.  What a cool way to add a special touch to customize glass tile pendants.  Use a meaningful photo instead of scrapbook paper as an alternative.  Make them as wedding/anniversary gifts with the couple’s wedding date!  The possibilities are endless.

 Be sure to check out the other Mother’s Day and Father’s Day projects my cohorts are making with Marth Stewart Crafts in the list below this post.

FOLLOW PLAID CRAFTS WITH ME!!

Website :: Facebook :: Twitter :: Pinterest

Disclosure: I wrote this post as part of a sponsored campaign with Plaid and The Blueprint Social.  All opinions are honest and mine!

 



DIY Cabochon Flower Hairpins: Easiest Project I’ve Ever Done

by

[pinit]

adorable, easy DIY flower hairpins @savedbyloves[pinit]

I gotta tell you that I don’t think I will ever outgrow flower cabochon hairpins!  I love them to itty bitty pieces.  Do I look silly?  Maybe.  Will that stop me from sporting them.  Nope.  If you aren’t into them cause you think you are too old, you’ll still love this project for the little ones.  Learn how to make these precious pins in just one step!

SUPPLIES:

adorable, easy DIY flower hairpins @savedbyloves

Resin flowers from ( I got mine from Pick Your Plum)

Hairpin blanks

E6000 Glue

TUTORIAL:

adorable, easy DIY flower hairpins @savedbyloves

Ready?  Place a dab of E6000 on the back of a flower and place on hairpin blank.  Ta-dah!

I told you it was the easiest project on the planet.

adorable, easy DIY flower hairpins @savedbyloves

I showed you a similar project in the past.  Remember my Anthropologie hairpin knockoffs?

Anthropologie Hairpin Knock off

 

These would make great Mother’s Day, birthday or bridesmaid gifts.  Fun for a slumber party craft for the girls too, don’t you think?

What are some of your favorite quick crafts?

Sizzix Embossed Birds Bracelet

by

Jewelry Tutorial Embossed Metal Squares

It has been a whirlwind of a weekend at SNAP 2013, and I can’t wait to share all of the creative awesomeness with you.  I missed you while I was away and it’s good to be back!

Today I am over at the Sizzix blog sharing this funky metal square embossed bracelet.  I wear the thing all of the time.  It has quickly become a favorite since it goes with so much and I love the design.  Go check out the easy step by step.

Stay tuned for some terrarium fun and so much more!

Chain & Cord Bracelet DIY

by

Chain and Cord Bracelet DIY from Katrinsine, featured @printabledecor1

 

It seems like this time of year I get more obsessed with bracelets than I usually am.  It’s a spring thing I guess.  I am working on these lovely double chain and cord bracelets from Katrinshine.  The tutorial couldn’t be simpler and they work up fast!

For plenty more DIY bracelets, see SBLC’s bracelet tutorials, and our 50+ bracelet roundup!

DIY Woven Wrap Bracelet

by

Easy Woven Wrap Bracelet DIY from Happy Hour Projects, featured @savedbyloves

 

I am loving this easy woven wrap bracelet from Happy Hour Projects!  I will be whipping some up this weekend.

For plenty more DIY bracelets, see SBLC’s bracelet tutorials, and our 50+ bracelet roundup!

How to Make Charms

by

how-to-make-charms-beauty-chick-text (1)

Happy spring time SBLC friends! Amy here from Plucking Daisies to share with you how to make some sweet springtime charms. These charms are super easy to make and use for a variety of crafty ventures! You can use them for custom jewelry pieces, ornaments or even wine charms for your Easter Brunch or spring celebrations!

I used my charms to decorate an Easter Bunny Tree. They are a lovely addition to my spring table decor and oh so charming!

How to make Charms | @PluckingDaisy #RangerInk

How to make Charms

You can make your own charms for adornments, jewelry, gifts and pretty much anything you can dream up. Grab your favorite images and prepare to be “charmed”!

Supplies:

Tim Holtz Idea-ology Facets or Fragments

Glossy Accents

Images or Photos (copies NOT originals)

Ribbon or Chain

Alcohol Ink

Ranger Foil Tape Sheets

Adhering Images to Charms

You can select any image you like to use when making your charms, a favorite photo (color copy), old greeting cards, a childs artwork…the possibilities are truly endless! For my charms I used these delightful vintage Easter Images from Tim Holtz Seasonal Paper Stash.

STEP 1: Apply Glossy Accents to the back of your charm and press down onto image.

STEP 2: Flip paper over and use a credit card or craft scraper to press out any air bubbles.

How to make Charms | @PluckingDaisy #RangerInk

STEP 3: Allow to dry for several hours then trim off excess paper.

Create Metal Backing for Charms

To finish and complete the look of your custom charms you can easily create a metal backing with Ranger foil tape sheets. Not only will the foil tape enhance the look of your charms, it will also smooth any rough edges and ensure your image stays put.

STEP 1: Ink a sheet of Ranger Foil Tape with Alcohol Ink. I used: Shell Pink – Salmon – Citrus – Aqua

How to make Charms | @PluckingDaisy #RangerInk

STEP 2: Emboss Alcohol Inked foil tape with Sizzix Embossing Folder. *I used Sizzix Dots and Flowers set A2

How to make Charms | @PluckingDaisy #RangerInk

STEP 3: Peel away the backing of your embossed foil tape and press cut out charms onto it. Cut around the charm leaving a slight edge all the way around. Fold edges over onto charm to secure your image.

Hanging Charms

Now that your charms are complete you will need to hang them. Whether you will be using them for jewelry, gift wrap or decor you can customize how you hang them just as easily as you made them!

STEP 1: Add Jump Rings

STEP 2: Reapply Alcohol ink to blending tool and stamp (DON’T swipe) onto Metallic ribbon.

How to make Charms | @PluckingDaisy #RangerInk

Use your stamped ribbon to create pendants, ornaments or “Charming” gift toppers!

How to make Charms | @PluckingDaisy #RangerInkI hope you enjoyed this little lesson in Charm making and will take what you learned to make some “Charming” gifts, jewelry and decor! Thanks for having me back at SBLC! Until next time…

Have a Charming Day!

Amy*

Make an Upcycled Plastic Bag Bracelet

by

Make an #upcycled plastic bag bracelet @savedbyloves #recycledcrafts

[pinit]

Today’s project is a fun plastic bag upcycled bracelet!  Fusing plastic bags creates a fabric that can be stitched, die cut, painted and embossed for some cool effects.  The possibilities are endless.  Keep your eyes peeled for brightly colored shopping bags and start hoarding!

SUPPLIES:

Plastic Bags

Copy paper

Iron

Ironing board

Chain Bracelet

Jump rings

Jewelry Hole Punch

2 pairs of chain nose pliers

PlasticBagBracelet3

TUTORIAL:

Turn iron onto Setting 4

To create the “fabric”  cut the handles from the bags and cut rectangular sheets smaller than your copy paper.  Layer 5-10 sheets and sandwich between the 2 sheets of copy paper

Iron 30 seconds (continuously moving iron to avoid melting plastic), flip sandwich over and iron other side for 30 sec.  Let cool 15 sec and check.  If plastic is not completely fused into one sheet (air bubbles and crackle sounds), repeat ironing and check again.

Die cut or hand cut small ovals and squares.  Hole punch and attach to bracelet chain with jump ring.  Alternate ovals and squares.

PlasticBagBracelet5

For loads more plastic bag creations to make, visit our 50+ roundup!

50+ projects to make using #recycled Plastic bags #upcycle #repurpose #DIY @savedbyloves

« Previous Page
Next Page »
Privacy Policy