[pinit]
[pinit]
Today’s project is a fun, quick DIY coffee table from wood pallets. My building partner in crime and I whipped it up in an afternoon. The plan we used is this Factory Cart Coffee Table from Ana White. See how we adjusted the plan to fit the pallet scraps on hand, and how we finished the table to a lovely, united weathered gray look.
TUTORIAL:
Constructing the table
We followed Ana’s plan linked above with the following adjustments: Instead of 1×6 boards we used thinner pallet slats across the top and the wider pallet slats for the sides. We just laid out the top slats until the table was the width we wanted, and measured that width. It was 42 3/4 instead of Ana’s 44 inches, so we adjusted the rest of the cuts accordingly. The long side boards we cut to 44 1/4 (42 3/4 + 1.5 inches for the thickness of the short side boards ). The short side boards and bottom boards were cut to 23 1/2, per Ana’s plan – the same length as the pallet slats making the top of the table.
We used 5 inch diameter casters that we picked up just for this project at Menards. Casters are more expensive than I had hoped, but considering the wood for the project was free, we still created this awesome table for less than $50!
Finishing the table
I applied Minwax wood conditioner per instructions on the can. It went on super easy. I let it sit for 15 minutes, wiped away the excess then stained with Minwax Classic Grey Wood Finish. This was my first time using wood conditioner, and it made the stain take beautifully. I will probably use it every time I stain from now on. It is quick to apply and makes a huge difference, for me anyway. I usually have blotchy, uneven outcomes when I stain.
To seal I used Minwax Finishing Wax.
Not bad for a pallet on it’s way to a landfill!
Check out our Wood Pallet 50+ Roundup for more inspiration:
Do you take an item like the coffee table and sale them locally? I know my wife is into the whole antique furniture thing and sales them at a variety of events. What would you price something like that table at if you were to sell it? Thank you.
Johnnie, I loved the pallet to coffee table project. Thanks for the inspiration and the directions! Frank
[…] Turn your pallets into a wonderful, one-of-a-kind coffee table. With just a little bit of work, a few extra materials, and less than $50 you can create a great piece for your living room. Find the how-to and full list of supplies here. […]
[…] Duplicate this low table even with some of the wooden pallet slats! savedbylovecr […]
[…] Duplicate this given low coffee table also with a few of pallet wood slats! savedbylovecr […]
[…] Duplicate this given low coffee table also with a few of pallet wood slats! savedbylovecr […]