Wood Pallet Cross Tutorial

Wood Pallet Cross DIY @savedbyloves

Today's project is a great way to use up those wood scraps leftover from previous projects. I will show you how to make this sturdy wood cross using pallet scraps and pocket holes. You will also learn how to easily create the chippy, distressed paint look seen here.

Wood Pallet Cross DIY

To start, I cut one scrap wood piece (2x4) to 18 inches and two pieces to 5 inches long.

I attached the 5 inch pieces to the 18 inch piece using pocket holes with my Kreg Jig (see How to Use Kreg Jig). The pocket holes are circled in the photo.

*Place a pocket hole on the bottom of the 18 inch piece for attaching the finished cross to a base. You want to do this before attaching the patchwork pieces in the next steps.

Folk Art Home Decor Chalk

I used Folk Art Home Decor Chalk to create the distressed paint look. It is super easy!

How to Distress Wood

I brushed base coat on thin pallet wood pieces and let that dry.

Create Chippy Paint Look

Using the Layering Block, I added more colors.

Create Weathered Wood Look with Paint

Lightly dragging the block across the dry painted board adds color in a chippy, random distressed fashion. Layer as many colors as you want, drying between each layer.

Patchwork Wood Cross

Once I had all the boardws painted, I cut them into random sized pieces and placed them on the cross. I made necessary cuts to the patchwork pieces with my mitre saw until everything fit into place.

Reclaimed Wood Projects

I glued the pieces into place and used my Ryobi AirStrike Nailer with one inch brads to secure them.

Reclaimed Wood Cross Tutorial

To finish, I centered the cross on a 2x4 rectangle and attached it with a pocket hole on the back of the cross and wood glue.

For more inspiration, visit our 50+ Scrap Wood Projects:

And our 50+ Wood Pallet Projects:

DIY Mudroom Storage Bench and Coat Rack

DIY Mudroom Storage Bench Free Woodworking Plans @savedbylovesOur laundry room is the high traffic area of the house. We go through it every time we come or go from the house. It had been crying out for a place to hang coats and to drop off “stuff” rather than haul it in and lay it on the kitchen table. One Saturday my husband decided that he was going to throw together some sort of a coat rack / bench that would serve our needs. Once he got me going on the idea it turned into a full blown re-do of the room. I have shown you the Free Laundry Room Printables and DIY Hardware Update, and today I am sharing how to make this fabulous mudroom bench/coat rack. This project was pretty easy once we got started, and cost under $150! We LOVE it. It is super handy, and it prompted us to paint and replace the floor in the room. It is now my favorite room in the house! On to the project. Shopping List 1. 3/4-inch birch-veneer plywood to build the seat box. Get one 4x8 sheet. 2. exterior-grade beadboard plywood to make the back panel on the wall. One 4x4 sheet will cover the area. 3. 1x16 solid-wood panel to make the seat lid. Get one 6-foot board. 4. 1x12 solid-wood panel to make the fascia board and shelf. Get two 6-foot boards. 5. 2x4 to create a support strip for the hinges that hold the box lid. Get 6 feet. 6. 1x4 to create the applied paneling on the front and sides of the box. Get four 8-foot boards. 7. 1x2 to cap the unfinished top edges of the bench box. Get 10 feet. 8. 3/8x7/8-inch panel molding to add a picture-frame detail to the paneling on the box and to trim above and below the beadboard panel. Get five 8-foot lengths. 9. ½x1-inch parting bead to finish the edges of the beadboard plywood. 10. 3/4-inch quarter-round molding to trim the beadboard panel and the base of the box. Get 16 feet.11. ½x7/8-inch decorative shoe molding to trim out the shelf, seat lid, and fascia. Get three 8-foot lengths. 12. 9-inch shelf brackets 13. 2-inch L-brackets to secure the box to the floor. Get seven. 14. European cabinet hinges to allow the lid to overlay the box and open smoothly. Choose ones that are labeled "for frameless cabinets." Get three. 15. Toy-box lid supports to keep the lid from slamming shut. Get two to support the weight of the lid. 16. 1 5/8-inch deck screws 17. 3½-inch deck screws 18. 2½-inch deck screws 19. 2-inch trim-head screws 20. 2d finish nails 21. 3d finish nails 22. carpenter's glue 23. vinyl adhesive caulk 24. 180-grit sandpaper 25. Shims     THE BENCH The bench I chose was modeled after a picture I saw of a classic entry hall built-in I saw on the This old house blog. It had everything we wanted; a place to sit, a place to store stuff, a shelf and plenty of coat hook space. All of this combined into a really nicely appointed, decorative piece that looks nice fits the room. We made adjustment to the plans to fit our needs where necessary. The dimensions were altered because our particular space required the bench to fit in a corner. Likewise, I changed a few pieces of the trim work to suit our taste. The shopping list I’m going to provide you will cover the better part of your project for the size bench we used. If you decide you want to expand or alter to fit your room then you might need to modify your purchase list accordingly. Here’s the one I used to start.
  1. Build and trim out the bench seat:
  I found the best spot in my laundry room was in one of the corners. So the first thing I did was take up the baseboard around the entire room. Next I just built a simple plywood box that would become the bench. No need to put a bottom in it. The box dimensions for my particular spot turned out to be 451/2 inches wide by 18 1/4 inches deep by 16-3/4 inches tall. Build this box out of ¾ inch “good-one-side” plywood. Try to get the box to sit as level on the floor as possible and fasten through the back into the studs in the wall using 2.5 inch deck screws. Just a couple or three places will be plenty. The Top of the box (which will be the bench seat is going to be made from the same ¾ inch plywood. It will need to overhang the box by about ½ inch on the front and the sides. But it will not go all the way to the back. ( you will see why later) Also, if your situation is like mine, where the bench will butt up against a wall in the corner, the top wont overlap on that side. So the dimension of my Top piece was 46 ½ by 16 inches.  
  1. Install the hinge support
Using a miter-saw, cut a 2x4 to fit the inside of the box along the back wall. Cut a 3½-inch-wide strip of plywood to the same length. Screw the pieces together with 15/8-inch deck screws. Position the 2x4 assembly along the back of the box, 3/4 inch above the back edge. Screw it on, through the box and into the studs, using 3½-inch deck screws. This piece will later be hidden by a plywood strip and molding. This is why the top is not as deep as the whole box. This is where the hinges are going to fasten. Screw L-brackets inside the box and to the floor, three inside the front edge and two on each side, to hold the box in place.
  1. Attach the panel molding to the seat.Next, I trimmed out the front and the one visible side of my box with 1 x 4 boards. This gives the box a dimensional, shadow box appearance. Cut the 1 x 4 so that the long pieces fit inside the two shorter upright pieces. This way you don’t see a cut edge. To create a profile on the inner edge of the 1x4 framing, cut panel molding to fit inside the 1x4 rectangles. Miter the ends of the molding. Nail the molding to the box, tight against the 1x4s, with 2d nails.
 
  1. Cap and Trim the box
Cut a piece of 1x2 to the width of the box. Glue and nail it to the top edge of the box front with 3d finish nails. Cut two pieces the depth of the box and use them to cap the sides. The side caps should now sit flush with the 2x4 assembly secured to the wall. Trim the base of the box using quarter round molding mitered 45 degrees at the corner joints.
  1. Trim the seat lid
  Using a miter saw, cut strips of ½x7/8-inch decorative shoe molding to fit the front and side edges of the lid. Miter the ends at the corners, but leave the back edges square. Attach the molding to the lid edge with wood glue and 2d finish nails. TOH Tip: To avoid splitting narrow wood stock with finish nails, dull the points of the nails with the strike of a hammer before tapping them in.  
  1. Install the Lid
Rip a piece of plywood to 2¼ inches wide and the length of the box This 45/3/4 inches in my case. Nail it down at the back edge of the seat box to cap the 2x4 assembly. This is labeled as the “Hinge support” on the above photo. Attach the lid to the 2x4 assembly using three European cabinet hinges, installed according to the "full overlay" instructions. This type of hinge allows the lid to open completely over the 2x4 assembly but conceal that same assembly when it's closed. The lid should overhang the box by 1 inch on the sides and front. This sounds more complicated than it is…Since your top has been cut short of the box dimension by this amount, you will have this 2/1/4 inch strip across the back that does not open with the lid. (see pic). You have to have this to carry the hinges. Setting the hinges requires a little bit of patience. The proper distance will be determined after a couple of openings and closings. There has to be a slight space to allow the lid board to pivot by the stationary hinge mounting board.  
  1. Mount the bead-board back panel
I ran the beads on my piece vertically. Since my bench was less than 48 inches I could use just one 4x4 sheet and rip it to the right height. In my case I liked keeping the board 4 feet above top of the lid. So actually you could purchase just one 4x4 sheet already cut. Where the bead-board meets the top of the bench seat I put a 1x4 trim piece to finish out the back. As you will see later, when I finish placing the shelf facia board later, I will put a matching piece at this seam. I think it finishes the back board nicely.  
  1. Hide the Bead-board edges
  I chose to use a small cove molding to finish out the vertical edges of the bead board. As with all of the trim in this project, take a look at the variety of Trim pieces available and get ones that suit your taste. There are lots and lots of styles available. Some will obviously not work at all and others will be great. There is no hard and fast rule to my knowledge. We often just use what we have left over from other projects.  
  1. Finish the Trim
I chose to use lengths of quarter round trim along the bottom edge of the box where it meets the floor. I mitered the corner where it wraps to the side. Take a look at your finished box at this point and decide if there are any gaps or spots that you feel like you want to cover with trim work or if just caulking alone will fill.
  1. Install the Fascia for the shelf
  Use a piece of 1x12 shelving board cut to the length of the top of the beadboard panel. This board will be called the fascia board for the shelf and will be where the coat hangers will ultimately goMount it to the wall using 2-inch trim-head screws installed through the studs  
  1. Mount the Shelf Brackets
  Measure and mark the placement of two shelf brackets on the fascia board. Using the provided hardware, install the shelf brackets flush with the top edge of the fascia board and on center at your marks.    
  1. Secure the Shelf
  Cut a piece of stock 1x12 shelving board the width of the bead-board. Set the shelf on the brackets and tight against the wall. Secure it to the brackets with 2-inch trim-head screws. Cut a 1x4 trim board and attach it to the top of the bead-board to fascia board seam. Attach with 2d nails. Caulk seams. DIY mudroom bench plans  
  1. Paint the Bench
  Sand the entire bench with 180-grit sandpaper. Fill all the nail holes and gaps between moldings with caulk. Prime the bench, bead-board panel, shelf, and moldings, then paint them with two coats of semi-gloss latex. Mudroom bench woodworking plans
  1. Attach the hardware
  Screw coat hooks to the fascia board, spaced evenly between the brackets.   Here you can see the accent wall we painted with stripes. Click the image or text for the FREE Laundry Room Printables!   Three Free Laundry Room Printables @savedbyloves          

50 Plus Favorite Pottery Barn Knock Offs

50 Plus Best Pottery Barn Knock Off Ideas from @savedbylovesWho doesn't love getting designer home decor and furniture for a fraction of the price? Today I am sharing our favorite Pottery Barn knock off decor DIY tutorials from around the web. If we missed your project, leave us a link!

DIY Christmas Sign and Chalky Finish Paint Giveaway

DIY Christmas Wood Sign Chalky Finish Today I am sharing how to make this easy Christmas sign on birch wood with Chalky Finish Paint. Have you ever used this paint? It is amazing. I am hooked! It comes in so many gorgeous colors and is easy to use without having to sand and prime the surface.  That's my kind of paint. You have a chance to win 8 colors of your choice and more, but we will get to that later! DIY Christmas Wood Sign

I scored this birch wood plaque from Michaels.

DIY Chalkboard

The paint color I used is Relic. It is beautiful!

Chalky Finish Birch Wood Christmas Sign

I used a foam brush to apply the paint.

DIY Chalkboard wood sign

Initially I planned to paint the letters on, but I decided to use chalk instead. Now I can change it with the seasons!

DIY Christmas Decor

I used my Cricut make a stencil out of clear contact paper. I love to use contact paper for stencils because it is way cheaper than adhesive vinyl. You can download the image file here: Joy and Holly Berries. If you don't have a cutting machine, you can print and transfer the image using transfer paper like I showed you here: DIY Reclaimed Wood Sign.

Chalky Finish Birch Wood SignTo finish, I added twine to hang the sign.  I love it!

Remember when we painted our kitchen cabinets? We used Everlasting Chalky Finish paint. It was a huge time saver to not have to sand/prime the cabinets and we are thrilled with them.

Americana Decor Chalky Finish paint is available in Michaels in the wood and finishes aisle. Visit the DecoArt Chalky Finish website for more chalk paint ideas and inspiration.

Chalky Finish Giveaway

UPDATE: CONTEST OVER; THE WINNER IS ERIN B.!!

Now for the giveaway! Enter for a chance to win 8 colors of your choice, clear and dark creme waxes, Soft Touch varnish, waxing brush and 2 stencils of your choice *. a Rafflecopter giveaway

* The items pictured are representations only. The stencils and paint will be selected by the winner.  Disclosure: I received product and compensation from DecoArt in exchange for my campaign.  All opinions are honest and mine, as always!  

Psalm 93 DIY Wood Pallet Nursery Sign

DIY Nursery Decor Wood Pallet Sign Psalm 93 @savedbylovesMy friend Jordan will be a momma any day now. I wondered if I would end up delivering the little guy the day she came over to make this nursery wall art, but he is not here yet! Today I am sharing how we created this lovely Psalm 93:4 sign for next to nothing out of pallet wood. It is so perfect in her nautical themed nursery! Download the cut file below and follow the steps to make your very own!

SUPPLIES:

Five pallet wood planks (Here is my video: How to Break Down Wood Pallets)

White chalky paint

Blue acrylic or chalky paint

Black vinyl for your die cut machine and transfer tape if you are die cutting the letters (if you don't have a die cut machine, you could download the phrase below and transfer the letters to the sign to hand paint it like I showed you here: DIY Hand Painted Rustic Wood Signs)

Die Cut machine and software to trace jpg file provided below (this is not needed if you are hand-painting the sign as shown in the previous link)

Drill and 1/2 inch hole saw bit

Rope

Kreg jig

1 1/4 inch Pocket Hole Screws

2 inch flat paint brush and round stencil brush

Psalm 93:4 text download

Free Anchor Clip Art

Mod Podge Matte Finish

TUTORIAL:

DIY Nursery Decor

Cut your boards to about 45 inches wide and attach them with pocket holes, staggered as shown - (Here is How to Use a Kreg Jig).

DIY Nursery Decor2

Paint the sign white with chalky paint (we used Folk Art Home Decor Chalk).

Let that dry, then dry brush blue randomly as shown.  We used a round stencil brush for this.

Let dry and cut or print and transfer text and anchor.  We used a 12x24 inch mat  and filled the entire area with the text.  We sized the anchor to 5 inches and cut everything in black vinyl.

DIY Nursery Decor3

Center and adhere vinyl letters and anchor using transfer tape. Seal letters and sign with Mod Podge Matte or desired finish.

DIY Nursery Decor6

Mark desired placement of holes and drill with spade bit to fit diameter of rope you are using. (We have the letters covered in this image because the Mod Podge wasn't dry and the saw dust would stick in it.  Don't judge, we were in a hurry)!

DIY Nursery Decor8We inserted the rope and hung it from a cool anchor hardware piece that Jordan found at Hobby Lobby for just $3!

DIY Nursery Decor Ideas

We LOVE it!! Jordan did a fantastic job with this nursery, and our sign tops it off perfectly.

We hope you are inspired to create your own!

DIY Custom Built-ins from Bookshelves

Today I finally get to show you my completed DIY custom built-ins we made using the 5 Shelf Bookcases from the Sauder website Four of the bookshelves cost less than $250, so we ended up getting four more to fill our space! These are perfect for the built-in project we had in mind, and we love the result!

Here are the assembled bookshelves.

I showed you these a few months ago, before we customized them to look like built-ins here: Stylish Craft Storage with Sauder Bookcases. They looked great then, but we wanted to add trim where they meet, and wrap the tops with crown molding and bottom with the room's baseboard to tie them into the room.

We removed the room's baseboard on the walls where we would be putting the bookshelves.

There were several things we ran into during this project. The first was we notices the baseboard was higher than the bottom shelf, so we added a new bottom shelf with 1x12 wood to be flush with the top of the baseboard. We attached the shelves with pocket holes using the Kreg jig.

Where the bookshelves meet, we had 1.75 inches to cover, and we found the perfect trim at our local hardware store. On the edges where there was just one bookshelf wall, we put 1x12 wood as shown so the 1.75 inch trim as flush on both sides.

We started with the baseboards and used construction adhesive along with the nailer.

Luckily we found baseboard to match what was already in the room!

We found this molding at our local big box hardware store and I was elated. We didn't have to figure out any complex angles since the molding was solid to a right angle!! Phew. You can read about our first experience cutting crown molding here: DIY Kitchen Cabinet Upgrade.

For the molding, baseboard and trim, we used construction adhesive and our cordless nailer to attach. We started with the baseboard and molding, then added the trim to cover the seams.

We found corner trim that was perfect for the corners at the hardware store. We used an unfinished cabinet door we scored for free on Craigslist as a desk in between shelves!

Above the desk we placed three 1x6 shelves, attaching them to the wall stud and bookshelves on both sides using pocket holes.

To see how I made the shelves on the left check out this tutorial: DIY Pallet Wood Paint Storage Shelves.

We primed and painted the trim and added wood and that was that!

These bookshelves are great as they come. With just a few supplies and a day's time, you can customize them for designer built-in style!

Visit Sauder for more than 30 distinct, affordable furniture collections in a full line of ready to assemble furnishings for your home, including entertainment, home office, bedroom, kitchen and storage!

Visit my Woodworking Pinterest Board for more home decor and furniture ideas!

This is a sponsored conversation written by me on behalf of Sauder. The opinions and text are all mine.

DIY Wood Pallet Hanging Planters

Wood Pallet ProjectKreg Jig K4 Pocket Hole System

I love decorating with mums in the fall, and it is well know that I am a wood pallet upcycling kind of DIY blogger. Today's project combines the two for some easy, inexpensive wood pallet hanging planters. This is a great way to use up your scrap wood, and is a perfect project for those new to woodworking since it doesn't require any fancy techniques. The metal chain and hardware with the wood give these planters a rustic, industrial feel that I adore.  Let's get started!

Cut List

4 - 2x2 pieces 6 inches long for the side posts

8 - 1x3 pieces 8 inches long for the side panels

1 - 1x6 piece 1o inches long for the bottom (this doesn't have to be exact - you can use whatever scrap wood you have on hand to make the bottom)

Materials

Metal chain and eye screws

Kreg screws 1 inch and 1.25 inches

Wood Glue

Kreg jig

Instructions

I made my planter to fit the plants I had on hand.  You can adjust the size to fit your plant.

Make Wood Pallet Home Decor

*I always use wood glue!

Begin by assembling the side panels with two pocket holes (I show you how to use the Kreg Jig here).  Set the depth of the jig to match with thickness of your pallet wood.  My pieces were 1x3 (which is really .75 inches thick) so I set the depth to 0.75 inches.  Use 2 - 1.25 inch screws to connect the sides.  Drill pocket holes one both sides of each side panel for attaching to 2x2 posts later.

Wood Planter Free Woodworking Plan

Next, attach the four posts to 2 of the side panels as shown.  I made the posts by cutting 2x4 to 6 inch pieces, then ripping those in half, all with my mitre saw.

Attach the bottom piece to the remaining 2 side panels with 2 pocket holes in each end.  Knowing what size kreg screw to use can be a process of elimination, but a general way to gauge pretty closely is to add the widths of the two pieces you are attaching and subtracting 0.25 from that to get your screw length.  So in this case 0.75 for the bottom piece + 0.75 for the side panel thickness - 0.25 equals 1.25 inch screws.

Free Woodworking Plans Hanging Planter

Finish the planter using the side panel pocket holes you drilled for the side post to attach the three pieces you assembled.

DIY Wood Pallet Hanging Planters @savedbyloves

Add eye screws into the 4 posts for chain and enjoy!

DIY Wood Pallet Coat Rack

How to Make a Wood Pallet Coat Rack @savedbyloves  

My sweet friend Jordan came over to learn how to build, and we started with this simple DIY Coat Rack from Shanty 2 Chic. I love when people have an interest in learning how to work with power tools, especially women.  It is so much easier than most would think, and there is not much more fulfilling than creating your own beautiful pieces from a pile of wood.  We followed Ashley's steps, substituting pallet wood everywhere except for the 4x4 and the furniture foot on top of the coat rack.  That made this project super cheap, and Jordan mastered the Kreg Jig, compound mitre saw, drill and air nailer! I think she is addicted, just like I was after My First Woodworking Build.

Wood Pallet Ideas

Here are the pallet wood legs that attach perpendicular to the bottom of the 4x4.

DIY Wood Pallet Furniture Plans

I was so glad the Shanty  2 Chic instructions suggested to make a line around the bottom of the 4x4 using the width of 1x3 scraps attached to the underside of the legs. This made attaching the legs to the 4x4 super simple.  Jordan used the Ryobi Air Strike cordless nailer to attach the pallet scrap "feet" to the underside of the legs. This tool makes building way faster and easier!

Wood Pallet Project Idea

Jordan attached the legs to the 4x4 using pocket holes she created with the Kreg jig, just like Ashley did in the Shanty 2 Chic tutorial.  To attach the angled supports, she used the Ryobi Nailer again.

DIY Furniture Woodworking Pallet Plans

To finish up, I cut a square from pallet wood and drilled a hole in the middle of it, using a bit just smaller than the diameter of the rebar on the furniture foot I picked up at Lowes.  (Jordan had to take off for an appointment, so I finished up the project that took just a couple of hours start to finish).

Mineral Green Stain

I applied Minwax Wood Conditioner, followed by Rustoleum Wood Stain in Mineral Green. Since I used wood that was different to start (the purchased, unfinished 4x4 and the weathered pallet wood), the stain took differently.  To unify the piece, I went over the stain in aging wax by Plaid.

Wood Pallet Furniture

Once that dried, I placed the furniture foot in place on top, and added 4 hooks purchased from Lowes.

DIY Wood Pallet Furniture

The piece stayed at my home for a few days before I took it to Jordan.  I got attached.  That is why I am no building my own!  It is a perk of creating with others... this isn't a piece I would have thought of for my space, and now I must have it.  Thanks Jordan!

DIY Graphic Centerpiece from Reclaimed Wood

How to Make a Reclaimed Wood Crate Centerpiece   Make a Reclaimed Wood Chicken Wire Crate

Now that I have your attention with a seriously adorable puppy and his one blue eye, I would like to show you how to make this chicken wire reclaimed wood graphic centerpiece! This piece definitely evolved as it was being made.  My friend came over to see if we could come up with a centerpiece for her square kitchen table, and we started at my wood pile.  We ripped some chippy painted trim, and added it to some pallet wood and wire.  We thought we were finished there,  but had the idea to visit The Graphics Fairy where we found the perfect vintage spoon and fork images to transfer onto the pallet wood sides.  The result is just what she had in mind, and now I want to make one for myself!

SUPPLIES:

Scrap wood (we used wood pallets and old trim)

Chicken Wire

 Ryobi Air Nailer

1 inch brad nails

Kreg jig

1 inch Kreg Screws

Wood Glue

White Tissue Paper

Mod Podge Matte

Printer (laser jet or ink jet printer are fine)

Card stock

Painter's Tape

Mitre Saw

Drill

Metal Snips

TUTORIAL:

DIY How to Make a Reclaimed Wood Crate Centerpiece

We knew we wanted a square crate.  Starting with the bottom, we used two 5.5 inch wide pieces of pallet wood that we cut to 11 inches long with the mitre saw.

We attached the pieces together with the Kreg Jig Pocket Hole System and 1 inch screws (I showed you how to use that here: How to Use a Kreg Jig).  The blue circles show the Kreg pocket holes.

We cut two pallet wood sides to 11 inches and attached them with pocket holes and .75 inch screws since the pallet wood sides were to thin for 1 inch screws.

Next we lined up the trim pieces we had ripped and marked them, cutting them with the mitre saw to the appropriate length.

How to build a crate

Next we cut the chicken wire with aviation snips to fit the sides of the crate.  We attached the chippy painted trim piece over the chicken wire to hold it in place.

DIY Centerpiece idea and beagle puppy

We thought we were finished, but then Victoria had the great idea of adding the chippy trim to the pallet wood sides where the arrows are in the photo.

DIY Reclaimed Wood Decor

We cut the trim to fit and nailed it into place with the Ryobi nailer.  This is what we were left with at that point.  I decided the wood area at the arrow and the side opposite it were perfect for graphics.  We chose the vintage spoon and fork graphics linked in the first paragraph and used the tissue paper image transfer technique I showed you here: DIY Image Transfer Recycled Glass Bottles.

DIY Fall Centerpiece

Not bad for a couple of hours and $0 spent!

How to Make a Reclaimed Wood Chicken Wire Crate

For more inspiration, visit our  50+ Image Transfer Techniques!

DIY Reclaimed Wood Craft Paint Storage Shelves

DIY Craft Paint Storage from Reclaimed Wood @savedbyloves

Paint storage is an issue in my new craft space.  Bookshelves are not a great solution since they are so deep and tall.  I like to be able to see my paints for inspiration, and to get to the colors I need easily.  I decided to make my own shelves that are shallow and closely spaced so that I could fit as many as possible in the allotted area.  This was a quick and easy project, made with reclaimed wood I had on hand, so I spent zero dollars.

SUPPLIES:

Reclaimed wood cut to length and width you want your shelves

Shims cut from 2x wood, the same length as the shelves (mine are 24 inches), 1/4 inch thick

2 1/2 inch Kreg Screws Kreg Jig

Ryobi Air Nailer

Wood Glue

Leveler

Stud Finder

Pencil

Tape Measurer

Straight Edge

TUTORIAL:

How to build wood pallet shelves

Cut shelves to 24 inches.  I used tongue and groove boards that I had on hand and ripped to 3.5 inches to fit my 3.25 inch paint jars.  I cut the groove edge off when I ripped them, so that the tongue edge would create a lip for the wood shims to sit on as the front of the shelf in a later step.

Drill Pocket Holes with Kreg Jig

Find studs and mark shelf boards in 2 spots where you will create pocket holes with Kreg Jig.  Create pocket holes like I showed you here:  How to use a Kreg Jig.  I decided to stagger my shelves, so I created pocket holes four inches from each end on half of my shelves and on the other half, 1 inch from one end and 7 inches from the other end.

Use Kreg Screws to attach shelf to studs

Use tape measurer and straight edge to draw lines on the wall where your shelves will go.  I spaced my shelves 5.75 inches apart.  Use 2.5 inch Kreg Screws to attache shelves into studs on your marked lines.  After placing the first screw, use leveler to level shelf, then place second screw in the other stud.

Attach Shelf Lip with Wood Glue and Air Nailer

Add wood glue to the tongue lip and place wood shim, creating front of shelf.  Nail shim into place with 1 inch brads in air nailer.

Craft Storage Ideas

Attach all shelves and place paint!

DIY Craft Paint Storage from Reclaimed Wood @savedbyloves

So easy, and free, this paint storage solution is tops!

What do you think?  How do you stay organized in your creative space?

DIY Craft Storage from Reclaimed Wood @savedbyloves