How to Make Jewelry From Flattened Pennies

pin-how-to-make-upcycled-jewelry-from-pennies

This post has been a long time coming. At this point, I can’t even recall what inspired me to smash pennies and turn them into jewelry, but something did and here we are. I will walk you through the interesting, not entirely legal process I used. Please note that in no way am I encouraging anyone to break the law, or to go anywhere near railroad tracks. The Midnight Rider controversy is no joke. While cute, this jewelry is not worth dying for, so be smart.

how-to-make-aa-jewelry

SUPPLIES:

Pennies or other coins

Clear masking tape

Jump rings

Jewelry Hole punch

jewelry rivets

Vintaj metal paints

Lisa Pavelka Resin Magic Glos

Magic Glos UV Resin, by Lisa Pavelka

Sizzix machine

Butterfly rings Sizzix Die

Media Mixage Triangle Dies

Media Mixage Circle Dies

Vintaj Vogue Stamping Blanks, Triangle 14mm

Your favorite embossing folders

eyelet setter

ear wire

Jewelry pliers (2 pair)

Paint brush or sponge dauber
1/4 cup white vinegar
1 teaspoon salt
Non-metal bowl
Paper towels

 

wm-aa-jewelry

TUTORIAL:

tape-pennies-to-track

This is the sketchy part. SBLC assumes no responsibility for any injuries that may occur. That said, this is also the super fun part. Tape the coins to the railroad track as shown in the photo. Not taping them just means searching needlessly after the train has passed, since they get thrown from their original location during the process. The tape keeps them in place.

pennies-after-flattening

This is what y0u will have when you retrieve your now flattened pennies. Flat, but yucky, right? No problem. To clean the little guys, pour the vinegar into the bowl and stir in salt. Put about 5 pennies into the solution and let them soak for about 10 seconds. Use a toothbrush and running water to remove debris and rinse clean.

how-to-flatten-pennies-for-free

They don’t have to be perfect.

how-to-flatten-pennies

Emboss your pennies and die cut into jewelry shapes. Here i cut the flattened and embossed pennies into circles and attached Vintaj Vogue Stamping Blanks Triangle 14mm using a rivet. Just hole punch the penny circles, insert rivet through triangle and circle, set with eyelet setter and attach jump ring and ear wires. Done!

aa-necklace-circle-triangle

For this pendant, I die cut a ring with the Sizzix butterfly rings die – a favorite die of mine. I cut a triangle with another embossed flattened penny and painted it using vintaj patina paints for metal. Once the paint was dry, I applied Magic Glos UV Resin, by Lisa Pavelka. I love the domed resin look. You can put this in direct sunlight to cure, or cure it in 10 minutes using Lisa Pavelka’s UV light. I went the 10 minute route! It’s been awhile since I used that stuff, and I forgot how fun it is.

upcycled-coin-pendant-jewelry-tutorial

This piece is comprised of a Vintaj metal blank (the background circle) and a flattened penny triangle that I painted with Vintaj Patina. I didn’t seal it. I enjoy the simplicity of the circle/triangle, and love the colors together. After applying the paint, go over the triangle lightly with medium grit sand paper to reveal the raised areas created by embossing previously.

Visit here for more RESIN JEWELRY TUTORIALS

fb-how-to-make-upcycled-jewelry-from-pennies

What do you think? Do you have a less illegal method for flattening pennies? Can your rope your husband into doing it for you, like I did?

You can use any coin, by the way. I just like copper.

I’d love to see what you can do with flattened coins. If you don’t have a die cut machine, you can cut shapes with metal shears or tin snips for your own custom creations! Happy crafting!

Upcycle Coffee Sleeves into Gorgeous Jewelry

How to Make Gorgeous Jewelry From Coffee Sleeves @savedbyloves

Today I am sharing with you this great coffee sleeve upcycle. With the amount of coffee I drink, the sleeves were starting to pile up. I saved them, knowing one day, inspiration would strike and I would repurpose them. The idea to create jewelry from them came to me over the weekend as I was sorting through my Sizzix dies. These are easily customizable to coordinate with any style. Follow along and make your very own!

SUPPLIES:

upcycled jewelry tutorial

Coffee Sleeves

Acrylic Paint (I used Distress Paint)

Asymmetric Rings Sizzix Die

Butterfly and Rings Sizzix Die

Mod Podge Antique

Non-Stick Craft Mat

Markers to coordinate with paint(I used Distress Marker – Vintage Photo)

Jump rings

Toggle clasp

Ear wires

2 pairs of jewelry pliers

INSTRUCTIONS:

2 Repurpose jewelry

Unfold coffee sleeve.

3 Upcycled Jewelry Tutorial

Randomly apply your favorite acrylic paint colors.

4 Jewelry Making Tutorial

I went for a warm and cool color range.

5 DIY Jewelry

Once paint is dry, cut out rings with sizzix as shown. If you don’t have a sizzix, you can cut by hand, or use paper punches.

6 How to Seal Paper Jewelry

Seal pieces for durability. I dipped them in Mod Podge antique finish.

7 Upcycled Jewelry Ideas

Brush away excess Mod Podge and let dry.

Distress Paper Edges

Mark around the inner and outer edges of the rings. On the left is before marking, the two on the right have been marked around the edges.

9 Attach rings with jump rings

Use various jump rings to attach rings for earrings and bracelets as shown.

Upcycled Earrings from Coffee Sleeves

How to Make Cardboard Jewelry

Jewelry from Coffee Sleeves

I am in love with these pieces! Super easy and cheap to make. You could also use the die cut coffee sleeve shapes in your mixed media art.

60 Ways to Upcycle Jeans

60 Things to Make from Old Jeans FB @savedbyloves





60 Things to Make from Old Jeans @savedbyloves

DIY Repurposed Shelf to Jewelry Display

DIY Jewelry Display

I don’t know what your earring situation is like, but mine was pretty sad until I took action. Today, I am sharing how I turned a piece of metal shelving from Habitat Restore into a cool earring display, with a little spray paint and some reclaimed wood.

Shelf

Here is the wire shelving section I used. Pictured is black chalkboard spray paint I used initially. I decided I didn’t love it, and went with metallic silver Krylon spray paint instead. Just spray evenly over a protected surface, in a space with good ventilation (preferably outdoors). Let dry completely. I let mine sit overnight.

How to Make a Repurposed Jewelry Display

Next it was time to build the frame. I used old wood that I found in the free section on Craiglist. This is by far my favorite source for free wood. My second favorite way to acquire free wood is to drive around alleyways near businesses or behind strip malls, looking for piles of pallets. I always make sure I ask, and most people are happy to have help getting rid of them. I have only been told “no” once.

Mark the wood with a pencil, using the shelf for measuring. Cut to 45° angles on each end of the wood, going in opposite directions. Cut two for the sides and two for the top and bottom. I used Kreg Jig pocket holes to connect the pieces at each corner to form a frame. For more details, see my post on How to Use a Kreg Jig and DIY Barnwood Frames.

DIY Shelving to Jewelry Display @savedbyloves

If you like this project, you will love our round-up of 50+ Creative DIY Jewelry Organizers:

Over 50 Creative DIY Jewelry Organizers to Make

Make Easy Earrings From Upcycled Fabric

How to make earrings

Not only are these earrings easy to make and cute, they are upcycled from some super meaningful fabric.  I created them from one of my beloved grandpa’s many handkerchiefs, soon after his passing. Whipping the cloth out of his pocket, he gently wiped away the tears from his loved ones eyes, and eliminated runny noses with joy. A single hanky is big enough to fashion several pairs, so the women in our family all have a wearable reminder of the best man to ever live (yes, I am biased, but also, he was the best)! Today I am going to show you how to make your own version in just a few simple steps. They would be cute fashioned from old jeans, your favorite shirt, your grandpa’s hanky, or just about any fabric you want. Let’s do this!!

How to Make Easy Upcycled Hanky Earrings @savedbyloves

SUPPLIES:

How to Make Memory Earrings

White handkerchief or fabric of your choice

Organza or Tulle

Metal Eyelets

Crop-a-Dile

Metal chain small enough to fit through eyelet

Metal washer from hardware store that eyelet will fit in and not slide through when set

Ear Wire from Vintaj

Tonic Scissors

Jewelry pliers (2 pairs)

-side note: I gave my grandpa the book Between Me and You GRANDPA, he filled it out completely, and it is a blessing beyond words. My most valued possession, for sure.

INSTRUCTIONS:

Use Spray Inks to Color Hanky

Spray fabric if desired. I went with a fall color palate using the spray inks shown. Let air dry for a couple of hours, then set by drying in machine on high heat for 5 minutes.

Make a Square Template From Cardstock

Make a square template from card stock about 1.5 inches wide and long (yeah, a square).

Cut Squares from fabric and organza

Cut several squares from your fabric of choice using the template as a guide. I cut some from tulle in addition to the hanky.

Hole Punch Center of Template

Hole punch center of template with Crop-a-Dile

Hole Punch Center of Fabric

Hole punch center of fabric using template as a guide. You can hole punch several squares at the same time, depending on the thickness of your fabric.
Make a Sandwich from Fabric Squares with Washer in the MiddleMake a sandwich from fabric squares with washer in the middle. I used 3-4 squares on each side of the washer. The purpose of the washer is stability and weight.
Use Crop a Dile to Set EyeletUse Crop-a-Dile to set eyelet.

https://savedbylovecreations.com/wp-content/uploads/2015/07/Insert-Metal-Chain-Through-Eyelet.png

Insert chain about 3 inches long through eyelet.

Use Jewelry Pliers to Add Ear Wire

Make a loop from the chain, using ear wire to join both the chain loops on each end. You are finished!

DIY Upcycled Fabric Earrings

DIY Upcycled Fabric Earrings from Hanky @savedbyloves

I love having something so reminiscient of my grandfather to wear, not that I need it to remember him. He is everywhere and I am blessed! I love you, Pa. And now the flood gates are open.

Here is to grandfathers everywhere! May you cherish every moment with yours.

 

Instagram DIY Project Tutorials 50 Plus

Over 50 DIY Instagram Projects to Make Updated Square @savedbyloves

It has been awhile since we shared our favorite 50+ Instagram crafts. We decided to update it with the latest projects to make with your favorite photos. Click the photo above or the link below for the collection. Enjoy!

Instagram Crafts

Easily Make Gorgeous Epoxy Clay Crystal Jewelry

How to Make Gorgeous Epoxy Clay Crystal Jewelry Square @savedbyloves

I went to CHA 2014 in Anaheim California, where epoxy clay jewelry was all the rage. I didn’t see what was so great about it, or why I would use it instead of polymer clay. It took me almost two years to get on board. Now I am a full fledge fanatic. The stuff is wonderful for embedding crystals and other small embellishments, since it is a strong adhesive. No glue is necessary, nor does it need to go in the oven. Once you mix the two parts, it starts to set and cures on its own without heat. Today I am sharing these gorgeous, blingy earring and pendant sets! My friend created hers and has zero experience with jewelry making or clay of any kind.  They came out beautifully, proving no prior knowledge is necessary!

DIY Easy Epoxy Clay Crystal Jewelry

SUPPLIES:

Supplies for Epoxy Clay Earrings

Epoxy Jewelry Clay (we used Silver Crystal Clay)

Beeswax coated toothpick (comes with Crystal Clay Kit) or my favorite tool for picking up small beads and embellishments, Crystal Katana

Crystal Chatons or flat backed Swarovski

Round Pendant Bezels

Ear wire or 20-22 gauge jewelry wire to create your own ear wire

Two pair flat nose jewelry pliers

Jump rings

Rattan cord or other necklace chain

Vinyl or latex protective gloves

INSTRUCTIONS:

Supplies for Epoxy Clay Jewelry

Mix clay according to instructions, equal parts of the two components and wearing gloves.

Embed Crystal Chatons into Epoxy Clay copy

Fill bezel flush with top.

Embed Crystals into Epoxy Clay

Add crystals in desired design with tool.

DIY Copper Crystal Epoxy Clay Earrings

Once cured (overnight) add ear wires with jewelry pliers and add chain or cord to pendant.

DIY Epoxy Clay Crystal Jewelry

Don’t they look so complicated, fancy and expensive?! Well, they aren’t. Your dog could probably make them.

DIY Easy Epoxy Clay Crystal Jewelry

I have gotten so many compliments already!

How to Make Gorgeous Epoxy Clay Crystal Jewelry @savedbyloves

Check out our other jewelry projects here:

Saved By Love Creations Jewelry Tutorials

Epoxy Clay DIY Patriotic Filigree Earrings

DIY Epoxy Resin Filigree Patriotic Earrings

DIY patriotic jewelry is a tradition here at Saved By Love Creations! For this pair I combined my newest obsession – epoxy clay – with metal filigree, to create these lovely, star spangled pieces. This project is super easy, so lets get started.

DIY Patriotic Earrings @savedbyloves

Supplies:

Epoxy Resin Mold

Martha Stewart Silicone Star Mold

Epoxy Clay (Martha Stewart shown here)

Metal Filigree

Ear wires

Metal Chain

Jump rings

Charms

Tim Holtz Distress Embossing Powder

White Embossing Powder

Heat tool or Melting Pot

Red Acrylic Paint (I used Vintaj Patina)

Antiquing Glaze

Small Paint Brush

Paper Towel

Latex gloves

Two pairs of jewelry pliers (flat or needle nose)

Instructions:

Silicone Resin Mold

Make the Stars

Mix equal parts of the epoxy clay per instructions, with gloved hands. Here I used Martha Stewart’s clay. I also like Crystal Clay and Envirotex Epoxy Clay.

Press Clay into silicone mold, making sure to push it down into the corners of the stars. Smooth out back of star with wet fingertip to avoid fingerprints.

Let the stars cure overnight, and paint as desired with acrylic paint. I left the blue stars as is, and for the red, I used the Vintaj Patina in red. I antiqued all of the stars with antiquing medium, applying it with a paintbrush and wiping it away with a paper towel while still wet.

Color the Filigree

Use red and white embossing powder to coat the filigree as shown in this Vintaj video:

Epoxy Resin Jewelry Tutorial

Adhere stars to colored filigree with a small amount of epoxy clay or strong jewelry glue.

Easy Epoxy Clay Jewelry DIY Patriotic Earrings @savedbyloves

Attach ear wires and charms and you are set!

Easy Epoxy Clay Jewelry DIY Patriotic Earrings @savedbyloves Pin

Remember Patriotic Earrings from prior years:

Over 50 Easy Watercolor Inspired DIY Tutorials

50 Plus Easy Watercolor DIY Decor and Art Tutorials @savedbyloves
I am thrilled to share today’s 50+ round-up! It is a colorful collection of watercolor inspired DIY tutorials that you can make, even if you aren’t an artist! From fashion to wall decor to kid’s crafts and more, you will be ready to create with these detailed tutorials. Enjoy!

50 Plus Awesome Yarn Crafts to Make

50 Best Yarn Crafts to make from @savedbylovesDon’t let the title scare you. For this collection, no crochet or knit skills are needed. This week’s crafty round-up is all about things to make with yarn. You will find all kinds of kids crafts, home decor, paper crafts and more. Enjoy!

Privacy Policy