Coffee Table Revamp with CeCe Caldwell Paint & Recycled Gift Cards

[pinit]

Makeover a table with CeCe Caldwell Chalk and Clay Paint @savedbyloves http://wp.me/p1BUxN-2Qm[pinit]

I have been dying to share this project with you for-like-ever!  I had this table I wanted to paint with fabulous paint.  So, I contacted my good friend Debi from Debi’s Design Diary and ordered CeCe Caldwell Paints.  Nothing else was going to do for this table.  The stuff is wonderful.

One of the big things that sets CeCe Caldwell paint apart from other brands is that is is non-toxic, containing no VOC and all ingredients are listed on the label.  Many low volatile organic compound paint brands don’t list their ingredients because they are not required to do so.  Many low voc brands still contain lots of harsh chemicals.  You aren’t washing anything harmful down the drain and you don’t have to worry about paint fumes or using gloves when waxing.  That is a plus!

Remember when I revamped this little junky table?  It was the first time I had used CeCe’s product, and it was love at first brush stroke.  You can read all about it by clicking the image or link, but basically I had zero experience and getting the look I wanted was super simple.

Back to today’s project:

 

I found this thing roadside, brought it home and painted it with a quatrefoil design on top:

You can click the image or go to Martha Stewart Coffee Table Revamp to read about that project.

How to custom Cut a Table to fit a space

Not only did I want to paint the table, but I wanted it to fit in a spot that it turns out was about 5 inches to small for it.   See how it sticks over to the carpeted area where the arrow is pointing?  No good. That is when John and I decided to cut the table in half, remove 5 inches, and put it back together using the Kreg Jig.  Whaaaat?  I know.

How to Revamp a Coffee Table

We took the top off the table then marked a 2.5 inches on either side of the center.

How to Use a Circular Saw

Making a Custom Coffee Table

I used a circular saw and cut along the lines to remove the 5 inch segment.

How to Clamp Wood

I drilled pocket holes with my Kreg Jig (love you, Kreg Jig) and attached the two shortened table halves together with Kreg screws.

Using Kreg Jig to Join Wood

Here is the top of the table joined with pocket holes and screws.  You can see the segment I removed in this photo.

How to cut a table in half and rejoin

I used the Kreg mini, clamping it onto the sides of the table on the inside to make pocket holes to attach the top of the table.

Distress Sanding a table

You can see the seam, just a little.  O.k., a lot.  I sanded the table with my Ryobi sander next.  You totally don’t need to sand or prime when using CeCe Caldwell paint.  I did this to try and even out the seam area.  For the first project linked above, I didn’t prep much at all.  That is my kind of paint!!

Ryobi sander for table distressing

Kissimmee Orange CeCe Caldwell Paint

After I sanded and wiped away the debris, it was time to get painting.  I am all about orange, and this Kissimmee Orange is beeeaauuutiful!

CeCe Caldwell distressed table

It goes on smoothly, with great coverage.

How to Join wood using Kreg Jig

This photo shows the seam at the blue arrow, which still needs some work.  It also shows wet paint vs. dry.  In the sunlight, the paint dries enough to do the top coat in 30 minutes.

How to use wood Putty

Before doing the next coat, I filled in the seam with wood putty.  When that dried, I sanded it down with the Ryobi sander.

Recycled Gift Card Craft

I did one more coat of the Kissimmee Orange to cover the wood putty and seam, then one coat of the Vintage White.  When that dried, I added tiles that I created from recycled gift cards and painted with Tim Holtz Distress Paint.  I showed you how I made and adhered the tiles in this Mosaic Frame from Recycled Gift Cards Tutorial.

How to Sand Distress a Table

Once the tiles were all in place, I used the sander to distress and bring out the orange under coat.

How to Distress Furniture

I went at it pretty aggressively.  You can sand a little or a lot for the look you want.

Clear Wax CeCe Caldwell

Applying Finishing Wax to Table

I applied the clear wax with the wax brush.  It is easy.  Just a light, even layer does the trick.

CeCe Caldwell Dark Wax

I applied CeCe Caldwell aging cream over the clear wax  to grunge it up a bit.  It is a subtle, nice antiquing effect.  I buffed with a soft cloth after an hour or so.  That makes a shiny, more durable finish.

How to Distress a Table

This is the final piece. I adore it.  I am off to order more paint!  I can’t get enough.

To find a CeCe Caldwell distributor near you, visit this Map of Retailers page.

For loads of inspiration on the amazing things you can do with this paint, visit Debi’s Design Diary the blog, Debi’s awesome YouTube channel, Facebook page and Pinterest!

Privacy Policy